Save A Computer Screen Display In Your Camera - Sanyo VPC HD2 - Xacti Camcorder - 720p Instruction Manual

Save a computer screen display in your camera

1 Run Screen Capture.
h Screen Capture starts automatically when you start your computer.
<To exit Screen Capture>
h Right-click on [Xacti Screen Capture 1.1] in the task tray, then left-click
on [Exit]. The screen to confirm the program exit appears; left click on
[Yes].
h To run Screen Capture again, select [Start]→[Programs]→[Xacti
Screen Capture 1.1].
2 On the computer's monitor, display the window you wish to save in
your camera.
h Make sure the window is selected, so that it is the active window.
3 Press the still image shooting button.
h The active window is saved as a bitmap image in your camera.
h When there is no active window, the entire screen display is saved.
h The saved data is stored in camera drive: \DCIM\***SANYO folder. To
view the image.
h To end the Screen Capture session, exit the Screen Capture program.
HINT
i Please connect only one camera when using the Screen Capture
application.
i The maximum file size for one screen display is 10 MB.
i Do not turn off the camera or remove the card during Screen Capture
operation. Doing so may corrupt the image data.
In addition, do not use a computer to manage data that is stored in the
card installed in the camera. Doing so may cause abnormal operation.
23
English