Setting To The Card Reader Mode - Sanyo VPC HD2 - Xacti Camcorder - 720p Instruction Manual

Setting to the card reader mode

1 Start your computer, and use the supplied USB interface cable to
connect the docking station to the computer.
h Connect the docking station's USB/AV terminal to the computer's USB
connector.
2 Press the ON/OFF button to turn the camera on, and set the camera
in the docking station.
h The USB Connection Screen appears on the camera's monitor.
Supplied dedicated USB interface cable
i Insert the plug with the [n] mark facing up.
3 Select "COMPUTER", and press the
SET button.
h The screen to select the computer
connection mode appears.
4 Select "CARD READER", and press
the SET button.
USB/AV terminal
To AC adaptor
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL OK
To USB connector on the computer
USB CONNECTION
CARD READER
SCREEN CAPTURE
PC CAMERA
CANCEL
MTP
OK
10
English