For Mac Os 9.Xx Users; For Mac Os X Users - Sanyo VPC HD2 - Xacti Camcorder - 720p Instruction Manual

For Mac OS 9.xx users

Mounting your camera
1 Set the camera to the card reader mode (page 10).
h The camera is recognized as a drive and appears as an icon named
[XACTI HD2] on the Desktop.
h Double-click on the [XACTI HD2] icon, and you can process the
contents of the card installed in your camera exactly like you would the
data in the other computer drives.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Drag the [XACTI HD2] icon for your camera on the Desktop to the
trashcan.
h The [XACTI HD2] icon disappears from the Desktop.
h You can now disconnect your camera.

For Mac OS X users

Use the same mounting and dismounting procedure as for the Mac OS
9.xx. However, if an application which automatically recognizes camera
images is installed, it will be activated.
CAUTION
When using in a Mac OS X Classic environment
i It is not possible to save or load data directly to or from the card installed in
the camera. The data must first be saved once to your hard disk.
14
English