For Windows 2000 Users - Sanyo VPC HD2 - Xacti Camcorder - 720p Instruction Manual

For Windows 2000 users

Mounting your camera
1 Set the camera to the card reader mode (page 10).
h If a message appears on the computer monitor instructing you to load
the Windows CD-ROM, follow the instructions and install the driver.
h The camera is recognized as a drive, and [Removable disk (E:)]
appears in the [My Computer] window.
* The drive name (E:) may be different on your computer.
h The card is recognized (mounted) as a disk.
h Double-click on the [Removable disk (E:)] icon in [My Computer], and
you can process the contents of the card installed in your camera
exactly like you would the data in the other computer drives.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Left-click on the [Unplug or Eject Hardware] icon on the task tray,
and then right-click on [Unplug or eject hardware] in the submenu.
h The remove hardware dialog box appears.
2 Left-click on [USB Mass Storage Device] in the list of devices, and
then left-click on [Stop].
h The [Stop a Hardware device] dialog box appears.
3 Left-click on [SANYO HD2 USB Device] and then left-click on the
[OK] button.
h The remove hardware dialog box appears.
4 Left-click on the [OK] button.
h You can now disconnect the camera.
13
English