Setting To The Card Reader Mode - Sanyo Vpc Ca6 - Xacti Camcorder - 6.0 Mp Instruction Manual
For digital movie camera
Hide thumbs
Also See for VPC CA6 - Xacti Camcorder - 6.0 MP:
- Instruction manual (28 pages) ,
- Safety manual (4 pages) ,
- Instruction manual (206 pages)
Table of Contents
Setting to the card reader mode
1 Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera's USB/AV terminal to the computer's USB
connector.
2 Turn on the camera (see page 28 in the camera's instruction
manual).
h The USB Connection Screen appears on the camera's monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL
OK
3 Select "COMPUTER", and press the SET button.
h The screen to select the computer connection mode appears.
4 Select "CARD READER", and press the SET button.
h The camera changes to the card reader mode.
h When connecting a mobile viewer, select "MOBILE VIEWER" and
press the SET button.
Supplied dedicated
USB interface cable
To USB connector
on the computer
To the USB/AV terminal
on the camera
8
English
Hide quick links:
Table of Contents
Need help?
Do you have a question about the VPC CA6 - Xacti Camcorder - 6.0 MP and is the answer not in the manual?