Camera Setup; Attaching The Wrist Strap; Inserting The Battery - Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Instruction Manual

Camera Setup

Attaching the Wrist Strap

Follow these instructions to attach the wrist strap to your camera to
facilitate easy carrying:
1. Insert the short loop of the strap in the strap eyelet.
2. String the larger loop of the strap through the short loop and pull tight
to attach the strap to the camera.

Inserting the Battery

Follow these instructions to insert one Li-ion battery into the battery compartment.
1. Open the battery compartment on
the left of the camera.
2. Insert the battery into the
compartment observing the
correct polarity.
(Label side up)
3. Close the battery compartment.
Note:
Use SANYO Li-ion battery, Type NP40, 3.7V, 720mAH and the battery should be fully charged
before using for the first time.
Camera Setup 15
Attaching the Wrist Strap