Camera Setup; Attaching The Wrist Strap; Inserting The Battery - Sanyo VPC-S1070 Instruction Manual

14 Camera Setup

Camera Setup

Attaching the Wrist Strap

Follow these instructions to attach the wrist strap to your camera to
facilitate easy carrying:
1. Insert the short loop of the strap in the strap eyelet.
2. String the larger loop of the strap through the short loop and
pull tight to attach the strap to the camera.

Inserting the Battery

Follow these instructions to insert the two AA bateries into the battery
compartment.
1. Open the battery com-
partment at the bottom
of the camera.
2. Insert the battery into the
compartment observing
the correct polarity.
3. Close the battery
compartment.
Note: The 2 supplied batteries (Alkaline) can be used. They are not rechargeable. Other new
AA Alkaline battery can be used. If you use type AA rechargeable batteries, they first have to
be full charged.
Attaching the Wrist Strap