SoundFreaq Sound Rise Classic Quick Start Manual

Title: QSG
Size:(150x150mm)
Printing:Black(double side printing)
Material: 70g W/F paper
Date:06-13-2017
The Sound Rise Classic Bluetooth Alarm Clock Speaker has high quality sound and
many features for your enjoyment.
Just follow the simple steps below to check it out.
Bluetooth Playback
1. Press Bluetooth Pair Button to enter pairing mode
to pair your device first. (The blue indicator will be
fast flashing.)
2. On your device, select
connect.
3. Most devices will not require password, if request
the default is "1234".
4. Either use the
your device to control playback and volume.
Notes: To pair another device, press and hold
Bluetooth Pair Button for 3 seconds. (The blue
indicator will be fast flashing again to pair new
device.)
AUX-IN Playback
1. Press POWER
white indicator will be on.)
2. Press
green indicator will be on.)
3. Connect your device to the
back.
4. Control playback on your device.
Volume
5. Press
adjust the playback volume.
Charging Your Mobile Device
Simply connect your device to the USB ports on
the top for charging.
Notes: The maximum charging output is 5V/2.1A.
1
Pair Button
"Sound Rise Classic" to
2 3
Play Control
buttons on the unit or
2
SOURCE
button to power on the unit. (The
SOURCE button to select AUX-IN. (The
AUX IN Cable on the
button on the unit or your device to
Quick Start Guide
Setting the Alarm
1. Rotate ALARM SET
direction of arrow till your desired alarm
wake-up time is shown.
Bluetooth
4
Play Control ALARM
2. Slide
the alarm on.
WAKE TO
3. Slide
up mode (BT/AUX/BEEP).
If wake to
sure to pair your device first and set the
playback volume loud on your device for
Sound Rise Classic
waking up .
If wake to AUX, please make sure your
device is playing and set the playback
volume loud on your device for waking up.
4. Press POWER
goodnight.(Do not adjust the volume level
on your device and the unit after setting.)
5
Volume
Notes:
Do not set the volume too low on your
device for alarm wakeup purpose.
Turning off the Alarm
1. Press SNOOZE / LIGHT
alarm is sounding. The alarm sound is
temporarily paused and starts again after
POWER
1
10 minutes later.You can repeat up to 12
times.
2. Slide and keep the
position to shut off the alarm before leaving
the room.
Notes: Slide the
AUX IN Cable
3
before your bedtime at night.
USB Charging
Using UQ3 Sound Enhancement
Press the UQ3
sound enhancement for great enjoyment
of your music.
Sound Rise Classic
knob on the side in the
ON
switch to position to turn
switch to your desired wake
BT (Bluetooth), please make
to switch off the unit and
button while
ALARM OFF
switch to
SNOOZE / LIGHT
1
ALARM switch back to ON
button to switch on the
UQ3
ON
POWER
4
OFF
2
ALARM