Canon 1629B001 - XH G1 Camcorder Manual page 26

CONSOLE Windows
Camera and Picture Control
Editing the Marker
1
Select a marker by placing a check mark and click the selected marker
name.
The marker is displayed in the marker preview.
2
Edit the marker by dragging with the mouse and/or entering the
coordinates of the marker.
• Drag the frame of the marker to move the marker.
• Drag one of the square marks on the frame to change the marker size.
• Taking the upper left corner as the base point, you can enter the coordinates of the marker
as a percentage. Clicking [Apply] after entering the coordinates displays the marker at the
specified coordinates.
• The safety zone, center, level and aspect markers cannot be edited.
Exporting the Marker
1
Select a marker you wish to save and click [Export].
When a window asking the destination folder and the file name is displayed, specify the
destination folder and the file name.
Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk
Importing the Marker
1
Click [Import].
When a window asking which marker to be imported, specify a marker that you wish to import.
2
Enter the information about the marker and click [Add].
• [Marker name] and [Aspect ratio] will be automatically entered according to the file.
• Clicking [Add] imports the marker and displays the newly imported marker in the marker list.
Deleting the Marker
1
Select a marker or a group you wish to delete.
2
Click [Delete].
• Click [Yes] when a confirmation window is displayed.
• When deleting a group, the group and all the markers in the group will also be deleted.
• The safety zone, center, level and aspect markers cannot be deleted.
Playback the Recorded Files 4-26