Cleaner Assembly; Carton Contents - Hoover SH40040 Owner's Manual

Carton Contents

A. Canister
B. Dirt Cup (packaged attached
to canister)
C. Hose
D. Telescoping Extension Wand
E. Power Nozzle
F. Crevice Tool
G. Dusting Brush
Remove all parts from carton and
identify each item shown.
Make sure all parts are located
before disposing of packing
materials.
ConneCt hose
WARNING
Always turn off appliance before connecting
hose.
1.2 Push Hose Connector end (A) into opening
(B) on front of cleaner. To disconnect hose from
cleaner, press release buttons (C) on sides of Hose
Connector and pull out.
IMPORTANT
The flexible hose contains electrical wires for
connection to the Power Nozzle and should not
be used if damaged, cut or punctured.
ConneCt wand
1.3 Push Hand Grip
(D) firmly into end of
Wand (E) until Latch
clicks. Push button
(F) on wand to utilize
telescopic feature. To
remove Wand from
Hose, press on Wand
Releases Button on
end of Wand and pull
apart.

1. Cleaner asseMbly

1.1
b
A
1.3
D
E
F
1.2
b
C
A
ConneCt nozzle
WARNING
Always turn off appliance before connecting
Power Nozzle.
1.4 Push the opposite
end of Wand firmly
into Power Nozzle.
To Release, step on
Wand Release Pedal (G)
and pull to disconnect
from nozzle.
5 Actual model may vary from images shown.
E
D
F
C
1.4
G
G