Adding Still Images to the [My Camera] Window
By adding an image to the [Computer] list, you can upload the image to the
camcorder for use as Start-up Image. Only still images with JPEG compression
can be added to the list.
1
In the [My Camera] window, select [Start-up Image] in the
[Type] list and click [Add].
The [Select an image to add] window appears.
2
Select the still image file (JPEG) you wish to save and click
[Open].
The selected file appears in the [Computer] list. You can now save the newly
added file to the camcorder using the procedures described in Changing the My
Camera Settings (
To delete a setting, select the file and click the [Send to Trash] button below the
[Computer] list.
Applying DPOF Settings
You can select images and the number of prints for automatic printing on a DPOF
(Digital Print Order Format)-compliant printer. You can set the DPOF print
settings also on the camcorder.
When you are using a SD memory card, make sure the protect switch is set
to allow recording.
The [Edit Slide/DPOF] window allows print settings on up to 998 still images.
With some camcorders, DPOF print settings are limited to a maximum of 200
still images. In that case, all DPOF print settings on the 201st still image and
onward will be erased.
If 999 or more images are recorded on a memory card, the [Edit Slide/
DPOF] window may not operate properly. To set the number of prints, reduce
the number of images on a memory card to 998 or less.
60
Applying the Camcorder Settings from the Computer
58).