Remove The Base Assembly For Vesa Mounting - Philips 24B2N3200J User Manual

2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling
the display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen. Then
lift the monitor stand.
2. While keeping the release button
pressed, tilt the base and slide it out.
3. Press both corners of the VESA Cover
and the other side of the cover will
pop out.
4. Remove the VESA Cover.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact the manufacturer for wall-
mount installation.
100mm
10
100mm