Sharkoon SKILLER SGK50 S3 Manual

Specifications

General
Type	Wired Keyboard
Switch Technology	Hot-Swap (Gateron G Pro 3.0 Yellow)
Number of Keys	85 ISO
Keycap Material	PBT
Keycap Legend	Dye Sub
Illumination	RGB
Adjustable Illumination
Lighting Effects
Max. Polling Rate	1,000 Hz
Form Factor	75% Layout
Onboard Memory for Game Profiles
Capacity of Onboard Memory	256 kB
Detachable Cable
Weight incl. Cable	1,149 g
Weight without Cable	1,084 g
Dimensions (L x W x H)	325 x 135 x 45 mm
Supported Operating Systems	Windows
Key Properties
N-Key Rollover Support
On-The-Fly Macro Recording
Operating Force	50 ± 15 g
Switch Properties	Linear
Distance to Actuation Point	2.0 ± 0.6 mm
Operating Life Cycles of Keys	Min. 100 Million Keystrokes
Cable and Connectors
Connector	USB Type-C
Textile-Braided Cable
Coiled Cable
Cable Length	150 cm
Gold-Plated USB Plug
Package Contents
SKILLER SGK50 S3 PBT Wood, Extra Keycaps, Keycap Puller Tool, Switch Puller Tool, USB Cable (150 cm)

VIA/QMK

If VIA configuration is not possible through the website at https://usevia.app/, please then use the alternative website at https://via.evove.top/.

Multimedia Keys

Lighting Effects

Lighting Profiles

Set up Lighting Profiles
To set up or modify lighting profiles, first press and hold down the function key and then also press the caret (^) key. Up to three lighting profiles can be accessed separately via the F7, F8 or F9 key. These keys begin to flash. To choose one of these three profiles, press and hold down the function key again and then also choose and press one of the keys that is now flashing. You can then select and press any keys that you wish to be illuminated. When you have finished with the selection of keys, press and hold down the function key again and then press the caret (^) key once more to save the personalized illumination. This can now be accessed via the previously chosen F7 - F9 key.

Macro Keys

Record Macros
To record macros, first press and hold down the function key and then press the Tab key. Once you have done this, the macro keys Ö and Ä will start flashing. Press and hold down the function key and press one of these two macro keys to select it for macro recording. In the next step, first press and hold down the function key and then press Caps Lock key. The macro key you selected will now start to light up continuously. You can now start entering your macro actions. You can enter up to 16 individual actions. When you have reached the maximum number of actions, the selected macro key starts to flash and the recording is automatically ended. However, if you would like to end the recording before all 16 available macro actions have been entered, first press and hold down the function key and then press the Caps Lock key to end the recording.

Additional Functions

Remove Keycaps

Before removing a switch, first remove the keycap. To do this, place the arms of the keycap puller tool either to the left and right or to the top and bottom of the keycap, and then pull the keycap upwards with careful but constant pressure. Whenever possible, avoid pulling the keycaps from the switch directly with your fingers, as this may damage the switch.

Remove Switches

Once you have removed the keycap from the switch, position the switch puller tool correctly on the tabs of the switch. These are positioned to the front and the back of the switch. Before pulling out the switch, make sure that both tabs are securely pressed with the switch puller tool and that the switch can be removed from the socket without resistance. If necessary, remove the adjacent keycaps to allow the switch puller tool sufficient freedom of movement. After you have removed the keycap, press both tabs of the switch with the switch puller tool and then slowly pull the switch out of the socket. Be sure to always pull vertically from the socket with a straight, upward direction. Avoid pulling in a slanted direction, as this can result in damage.

Install Switches

To install the switches, position the switch so that one tab is at the front and the other tab is at the back. Each pin on the underside of the switch should be pointing exactly to its relevant contact in the keyboard socket. Make sure that the switch is led vertically into the socket opening (at a 90-degree angle to the socket). Installing the switch incorrectly can lead to damage or malfunction of the switch. After you have placed the switch in its socket, push very gently on the switch to secure it in place. Make sure that you do not use too much force, as this can damage or destroy fragile components.

Safety Instructions

This device is intended as a keyboard for use with a PC. For your own safety, be sure to read the instructions below before using the device. If the product is damaged due to improper use or non-compliance with the safety instructions, the manufacturer's guarantee will be void.

• Ensure that the device is not damaged before use.
• Only use the device indoors in areas with normal humidity.
• Ensure that the device does not come into contact with moisture or liquids.
• Only clean the device with a dry cloth.
• Connect this device only with compatible, intended cables and only to other compatible, intended devices.
• The device does not contain any components that require maintenance. Opening the keyboard housing will result in the loss of the guarantee.

Sharkoon Technologies GmbH
Grüninger Weg 48
35415 Pohlheim
Germany

Documents / Resources

References

• VIA
• VIA

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sharkoon SKILLER SGK50 S3 Manual