Page 1
QUICK GUIDE Wireless battery Wi-Fi security camera Email: support@arenti.com Phone: 1-866-999-7868, Mon-Fri 9AM-5PM (PT) Toll free for USA&Canada, subject to charges for other regions Phone Service Language only available in English...
support@arenti.com 2. Product description Lens Speaker Hole for mounting Microphone Status light bracket White light & IR light Power port Power button TF card slot RESET Status light Description Flashing red light (slow) Wait for network configuration Flashing red light (fast) Connecting the network Fixed red light Network is malfunctional...
Page 4
support@arenti.com • Keep it in range of your router Wi-Fi. • Avoid the front of the lens facing the plant or porch light; Avoid facing a busy road. • Install it 2-3 meters (7-10 ft) above the ground - close enough to see someone's face and talk to them through the camera.
After adjusting the angle, support@arenti.com please fasten b. Install the device in the bracket and lock it with the bottom screw. the screw �~���° After adjusting the angle, please fasten the screw 4. Product configuration Scan QR code to download and install the Arenti App. Or you can search "Arenti" on App Store (iOS) or Google Play (Android).
Page 6
support@arenti.com Registration Open the App. If you are a new user, tap to create a new account and follow the prompts to complete account setup. Note: Before creating a new account, please read the Privacy Policy and Terms of Use carefully. Powering on the device Power on the camera.
Page 7
support@arenti.com Scan the QR code on the device...
Page 8
support@arenti.com Pairing method 2: pairing via bluetooth Turn on your phone's bluetooth. Open App home page, click "+" >> "Add Device" or "Add", the device will be searched for by bluetooth and appears on the page. Click the device and follow the notes to pair the camera with App.
Page 9
support@arenti.com Select a fluent and steady Wi-Fi and input the password. Then, scan the QR code in the App on your camera. Click "Next" and use the camera to scan the QR code in the App on your mobile phone.
Page 10
support@arenti.com Scan the QR code of App If no device is found and the pairing process is not successful, please check below instructions: • Make sure the camera is in pairing mode. • Ensure that the Wi-Fi network is set to 2.4GHz. •...
Make your retailer take back the products or use selective collect of garbage proposed by your city. Hereby, we declare that the radio equipment type 'W2' is in compliance with the Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following...
Page 12
support@arenti.com FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 13
support@arenti.com Industry Canada (ISED) Compliance Statement This device complies with Industry Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Page 14
support@arenti.com malfunctions, or electric shocks. Child's Safety • Comply with all precautions with regard to child's safety. Letting children play with the device or its accessories may be dangerous. • The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.
Need help?
Do you have a question about the W2 and is the answer not in the manual?
Questions and answers