Table of Contents
Advertisement
subtracts the same amount from a previously
adjusted automation track. For example, when used
for faders, all moves are maintained but the overall
volume changes.
•
Press TRIM LEVELS in the control surface
Automation section, on-screen Locator window,
or in the Options>Automation menu. Notice that
the faders all snap to unity position.
Even though TRIM LEVELS is selected and
the faders all move to unity position, the automa-
tion modes still retain their operational character.
•
The faders automatically set at unity so they can
be easily used to boost or cut the previously
adjusted track content.
•
This is an excellent mode to globally adjust
channel levels.
•
Simply raise or lower the fader level to boost or
cut the sum of your previous adjustments for the
selected channel.
Automation of EQ, dynamics, and effects is simple.
•
Select automation mode (ALL).
•
Start the playback/record device.
•
Activate automation record command.
•
Make changes.
In order for these parameters to record, ALL
must be selected in the control surface AUTOMA-
TION section, on-screen Locator window, or in the
Options/Automation window.
These checklists are designed as skeletal
reminders of the processes previously described. If
you follow them and have a basic understanding of
the D8B automation system, they'll help instill an
efficient automation procedure.
Advertisement
Table of Contents
