PROCET PT-PR01G-10 User Manual

PT- PR01G- 10 PoE Surge Prot ect or
Ｕｓｅｒ Ｍ ａｎｕａｌ
www.procetpoe.com
Overview
PT- PR01G- 10 is a single- port Et hernet surge prot ect or. Enclosed in an Aluminum Alloy shell, wit h
a silver color ext erior, complement ed by an anodized aluminum surface. Enhanced RJ45 socket
exhibit s minimal signal at t enuat ion. High- qualit y Gas discharge t ube(GDT). Wit hst and ext reme
environment al condit ions wit hin a t emperat ure range of - 40 t o 85 degrees Celsius. Max Discharge
Current : 10KA (8/ 20us, 1.25KA per line). Support s power of 120W, 60Vdc(max) Et hernet
equipment .
PT- PR01G- 10 can not only work wit h IEEE802.3af/ at / bt / PoE++ st andard devices, but also
support s non- st andard Et hernet equipment , t hat well prot ect s your devices against surge
damage.
The common mode surge volt age exceeds 10KV(10/ 700us) and t he different ial mode surge
volt age is 1.5KV(10/ 700us).
It support s not only 10/ 100/ 1000Mbps of dat a speed, but also 2.5GbE/ 5GbE/ 10GbE NBase- T.
Appearance
１ Ｐｒｏｄｕｃｔ Ｄｉａｇ ｒａｍ
�
�
�.Fixing holes
�.Label
�.PoE input and Out put port
�.GND Terminal
�
�
Ｄｅｃｌａｒａｔｉｏｎ
Copyright © 2024 Creative Lianjie Network
Technology Co.Ltd
This docum ent belongs to PROCET com pany. It is not
allowed to reproduce and m odify without the original
author's perm ission. It is PROCET's policy to im prove its
products as new technology com ponents, software , and
firm ware at any tim e. PROCET, therefore, reserves the right
to change specifications without prior notice.
Please follow WEEE (Waste Electrical and Electronic
Equipm ent) disposal instructions for old electronic
products.Please do not dispose of the old product in your
general household waste bin.
The sym bol indicates that the product should not be
discarded as unsorted waste but m ust be sent to separate
collection facilities for recovery and recycling.
�� MM
2 Dimensions
All rights reserved.
�� MM