Craftsman 17761 - 16 Gal. Wet-Dry VAC Owner's Manual page 7

Vac Assembly (continued)
Cord Wrap
The wet/dry vac has a convenient cord
wrap area designed on the rear of the vac.
Simply, wrap the power cord around the
push/pull handle and cord wrap, then snap
the connector on the plug to a wrap of the
cord. The cord is now wrapped for storage.
Insert Hose
Wrap
insert the hose locking end of the "Pos-I-
Lock" hose into the inlet of the vac. The
hose should snap into place. To remove
the hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown.
Push/Pull Handle
Port
Handle
Drum
Press
end
Pull
Switch
Vaccum
Port
Release
Swivel
End
Utility Nozzle
Accessory and Hose Storage
Your accessories may be stored in the wrapping it around the unit and plugging
caster feet or in the storage locations on he open end into one of the storage
the lid. The hose may be stored by locations on the caster feet.
Hose
Power
Assembly
Push BuRon
End Of Hose