Advertisement
Advertisement
Table of Contents
Related Manuals for Solplanet ASW125K-LT
Summary of Contents for Solplanet ASW125K-LT
-
Page 3: General Information
Any other application may cause personal injury or damage to property. The product must only be used in countries for which it is approved by Solplanet and the grid operator. The type label must be permanently attached to the product and must be in a legible condition. - Page 4 Important safety instructions The product has been designed and tested strictly according to the international safety requirements. As with all electrical or electronical devices, there are residual risks despite careful construction. To prevent personal injury and property damage and to ensure long-term operation of the product, read this section carefully and observe all safety information at all times.
- Page 5 DANGER Danger to life due to electric shock when touching live system components in case of a ground fault！ If a ground fault occurs, parts of the system may still be live. Touching live parts and cables may result in death or lethal injuries due to electric shock. Disconnect the product from voltage and energy sources and ensure it cannot be ...
- Page 6 Symbols on the label Beware of a danger zone This symbol indicates that the inverter must be additionally grounded if additional grounding or equipotential bonding is required at the installation site. Beware of high voltage and operating current The inverter operates at high voltage and current. Work on the inverter must only be carried out by skilled and authorized electricians.
-
Page 7: Eu Declaration Of Conformity
AISWEI Technology Co., Ltd. confirms here with that the products described in this document are in compliance with the fundamental requirements and other relevant provisions of the above mentioned directives. The entire EU Declaration of Conformity can be found at www.solplanet.net. Overview Name... -
Page 8: Scope Of Delivery
COM2: RS485 Communication port AC cable - knockout seal (Single core conductor) Vent valve DC connector inputs 7-12 (Connected to DC switch 2) DC switch 2 DC connector inputs 17-20 (Connected to DC switch 4) DC switch 4 COM5: Connection of Ripple control receiver/Connection of Demand response modes/ NS protection device COM3: RS485 Communication port AC cable - knockout seal (Multicore conductor) -
Page 9: Mounting Environment
DC connector (pair) M5×12 Screws RJ45 Connection waterproof housing M4×9 Screws M10×20 Bolt Document package T30 plum blossom wrench Mounting Environment ASW125k-LT_EN_V01... - Page 10 DIMENSIONS Mounting Take out the inverter ASW125k-LT_EN_V01...
- Page 11 Moving the inverter （Optional） ASW125k-LT_EN_V01...
- Page 12 Mounting-bracket 1.6 N.m 19 mm 45 N.m Wall-Mounted Installation / / ASW125k-LT_EN_V01...
- Page 13 Second Protective Grounding 10 AC Connection ASW125k-LT_EN_V01...
- Page 14 Multicore conductor 24≤A<40 mm 40≤A<66 mm ASW125k-LT_EN_V01...
- Page 15 Single core conductor 14≤B<25 mm 25≤B<35 mm ASW125k-LT_EN_V01...
- Page 16 DC Connection Click ASW125k-LT_EN_V01...
-
Page 17: Communication Connection
12 Communication Connection 12.1 COM1:Ai-Dongle connection ASW125k-LT_EN_V01... - Page 18 12.2 COM2&COM3: RS485 cable connection PORT DEFINE DESCRIPTION +8VA_SELV Used for connection to 3rd GND_SELV COM2 party, such as State Grid RS485A Dispatch (SGD) RS485B +8VA_SELV Used for cascading GND_SELV inverters or connecting to COM3 devices such as the Data RS485A Logger, smart meter RS485B...
- Page 19 / 12.3 COM4&COM5: NS protection device/Connection of Ripple control receiver /Demand response modes ASW125k-LT_EN_V01...
- Page 20 NS protection device Connection of Ripple control receiver Demand response modes ASW125k-LT_EN_V01...
- Page 21 ——Inverter serial number ——Photovoltaic module model ——Photovoltaic modules number and strings number connected to each MPPT ——Fault code ——Installation location ——Warranty card EMEA Service email: service.EMEA@solplanet.net APAC Service email: service.APAC@solplanet.net LATAM Service email: service.LATAM@solplanet.net Aiswei Greater China Service email: service.china@aiswei-tech.com...
- Page 24 ASW125k-LT_EN_V01...
Need help?
Do you have a question about the ASW125K-LT and is the answer not in the manual?
Questions and answers