Related Manuals for Sencor SRV 7450WH
Summary of Contents for Sencor SRV 7450WH
- Page 1 SRV 7450WH SRV 7485WH ROBOTIC VACUUM CLEANER Translation of the original manual...
- Page 2 SRV 7450WH SRV 7485WH...
-
Page 10: Important Safety Instructions
The appliance must only be used with the collection • container (model SRV 7485WH) or with the charging station (SRV 7450WH) supplied with the appliance. WARNING: Do not use the collection container or charging station to charge batteries or appliances that are not designed for this purpose. - Page 11 Connect the collection station or power adapter only to • a power socket with a protective contact............................. Electrical Safety •...
-
Page 12: Battery Disposal
EXPLANATION OF SYMBOLS PLACED ON THE PRODUCT OR IN THE ACCOMPANYING DOCUMENTATION The product meets all the basic requirements of the applicable EU directives. This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste. - Page 13 EN Robotic Vacuum Cleaner User Manual • Thank you for purchasing our SENCOR product; we hope it will serve • HEPA filter (2 pcs: 1 filter installed on the vacuum cleaner; 1 spare to your satisfaction. HEPA filter) • Prior to using this appliance, please read the user manual thoroughly, •...
- Page 14 outwards – see figure E3. Gently push down on the dust container pattern. After finishing the cleaning, the robotic vacuum cleaner will automatically return to the collection station / charging station. from behind until you hear a click. This indicates that the dust container is correctly secured in the vacuum cleaner.
-
Page 15: Before First Use
Adding the Robotic Vacuum Cleaner to the Device List via Bluetooth Note: You can add the robotic vacuum cleaner to the Sencor HOME app by The robotic vacuum cleaner will not switch to sleep mode pairing via Bluetooth. -
Page 16: Cleaning And Maintenance
Adding the Robotic Vacuum Cleaner to the Device List via a QR Code vacuum cleaner empties the contents of the dust container after the The robotic vacuum cleaner can also be added to the Sencor HOME cleaning is completed, or if it detects that the dust container is full. In this application using the QR code provided below. - Page 17 Cleaning the Side Rotary Brush a different vacuum cleaner with an attached brush nozzle. Do not wash the HEPA filter in water. This may damage the appliance. In Remove the side rotary brush by pulling it upwards. the event that the HEPA filter is already heavily soiled or deformed, Remove any dust and dirt from the location where the brushes were replace it with a new one.
-
Page 18: Long Term Storage
Place the new dust bag into the collection container. It is important that the inlet opening in the bag is aligned with the outlet opening in the inner space of the collection container. Close the cover. Cleaning the Sensors Sensors at the collection station are important for its safe operation. It is therefore important that you clean them regularly and keep them in good condition. - Page 19 Problem Cause Solution The vacuum cleaner does not The vacuum cleaner is not switched on and cannot Swich on the vacuum cleaner. perform the cleaning process perform the cleaning process as scheduled. automatically as scheduled. The vacuum cleaner battery is almost flat. Allow the vacuum cleaner to recharge.
-
Page 20: Technical Specifications
The model name of the collection station is: SRX 7413. Please contact your dealer. SENCOR hereby declares that the SRV 7450WH and SRV 7485WH radio type devices comply with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: www.sencor.eu. - Page 21 - 12 - 01/2025 2025,...
Need help?
Do you have a question about the SRV 7450WH and is the answer not in the manual?
Questions and answers