Download Print this page
Sencor SRV 4250SL Translation Of The Original Manual

Sencor SRV 4250SL Translation Of The Original Manual

Robotic vacuum cleaner

Advertisement

Quick Links

SRV 4250SL
EN Robotic Vacuum Cleaner
Translation of the original manual
Copyright © 2020, Fast ČR, a.s.
- 1 -
11/2020

Advertisement

loading

Summary of Contents for Sencor SRV 4250SL

  • Page 1 SRV 4250SL EN Robotic Vacuum Cleaner Translation of the original manual Copyright © 2020, Fast ČR, a.s. - 1 - 11/2020...
  • Page 2 Robotic vacuum cleaner Important safety instructions READ CAREFULLY AND STORE FOR FUTURE USE. General warnings This appliance may be used by children 8 years of age and older ■ and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers.
  • Page 3 Electrical safety ■ Before connecting the adapter to a power socket check that the technical details on the rating label match the electrical voltage in the socket. ■ Connect the power adapter only to a properly grounded power socket. Do not use an extension cord. ■...
  • Page 4 SRV 4250SL Copyright © 2020, Fast ČR, a.s. - 4 - 11/2020...
  • Page 5 PLAN HOME ON/OFF MODE Copyright © 2020, Fast ČR, a.s. - 5 - 11/2020...
  • Page 6 Copyright © 2020, Fast ČR, a.s. - 6 - 11/2020...
  • Page 7 EN: Link to the application for controlling the vacuum APP Store Google Play cleaner Copyright © 2020, Fast ČR, a.s. - 7 - 11/2020...
  • Page 8 ■ Another advantage the a  robotic vacuum cleaner is the mop function, which Robotic vacuum enables dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum cleaner vacuums small bits of dirt and dust from the floor to prevent the mop fabric from being excessively soiled during the cleaning cycle.
  • Page 9 INSERTING AND REPLACING BATTERIES IN THE REMOTE CONTROL SPIRAL CLEANING MODE ■ Push down the latch of cover C13 on the rear side of the remote control C1 to ■ Press button C10 (MODE) on the remote control so that display E2 shows MODE1. release it and remove the cover.
  • Page 10 MEANINGS OF LIGHT AND AUDIO SIGNALS OF THE VACUUM Setting scheduled cleaning using the remote control: ■ Hold down button C3 (PLAN), until the time setting figures start flashing (hours and CLEANER minutes). ■ Use buttons C5 ( ) or C8 ( ) to set the time values.
  • Page 11 ■ First remove any coarser dirt from the front swivel wheel and the motorised wheels. Then clean them around their entire perimeter using a lightly dampened cloth and SENCOR hereby declares that radio device model number SRV 4250SL is in compliance wipe them dry. Do not forget to also clean the area around the wheels.