Related Manuals for Sencor SRV 2230TI
Summary of Contents for Sencor SRV 2230TI
- Page 1 SRV 2230TI EN Robotic Vacuum Cleaner Translation of the original manual Copyright © 2020, Fast ČR, a.s. - 1 - 07/2020...
-
Page 2: General Warnings
Robotic vacuum cleaner Important safety instructions READ CAREFULLY AND STORE FOR FUTURE USE. General warnings This appliance may be used by children 8 years of age and older ■ and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers. -
Page 3: Electrical Safety
Electrical safety ■ Before connecting the adapter to a power socket check that the technical details on the rating label match the electrical voltage in the socket. ■ Connect the power adapter only to a properly grounded power socket. Do not use an extension cord. ■... - Page 4 SRV 2230TI Copyright © 2020, Fast ČR, a.s. - 4 - 07/2020...
- Page 5 Copyright © 2020, Fast ČR, a.s. - 5 - 07/2020...
- Page 6 Copyright © 2020, Fast ČR, a.s. - 6 - 07/2020...
- Page 7 PLAN HOME ON/OFF MODE Copyright © 2020, Fast ČR, a.s. - 7 - 07/2020...
-
Page 8: Description Of The Appliance And Accessories
■ For easy identification of the operating state, the button on the top cover has an Robotic vacuum cleaner indicator light the colour of which indicates low battery voltage (lit red), battery charging (flashing red), full charge and operation (lit blue). Error states are then indicated by various numbers of flashes or colour combinations, see chapter User's manual TROUBLESHOOTING. - Page 9 SETTING THE SYSTEM TIME OF THE ROBOTIC VACUUM CLEANER ZIG-ZAG CLEANING MODE ■ The system time of the vacuum cleaner is the actual time according to your time ■ Repeatedly press button E10 (MODE) on the remote control so that display E2 shows MODE4.
-
Page 10: Troubleshooting
Cancelling scheduled cleaning LIGHT SIGNALS ■ Hold down the button E3 (PLAN). The set automatic cleaning time will start flashing FLASHING on the display E2. MEANING SOLUTION BUTTON A2 ■ Hold down button E9 (ON/OFF) until 00:00 appears on the display. Pressing button E9 again will cancel the set time and the vacuum cleaner will beep 2x. -
Page 11: Cleaning And Maintenance
CLEANING AND MAINTENANCE STORAGE ■ Prior to cleaning it, always turn off the vacuum cleaner using the main switch A4. ■ When not using the vacuum cleaner for an extended period of time, do the ■ For cleaning, never use abrasive cleaning products, solvents, etc. following: ■...