Getting Started; Battery Pack Installation; Battery Notice - VTech 80-067000 - V.Smile Art Studio User Manual

GETTING STARTED

BATTERY PACK INSTALLATION

1. Locate the battery cover on the bottom of the main
unit.
2. Remove the battery cover.
3. Insert 4"AA"size batteries as illustrated.
4. Replace the battery cover.

BATTERY NOTICE

• Do not try to recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not mix different types of batteries.
• Do not mix new and used batteries.
• Only use batteries of the recommended or equivalent type.
• Always insert batteries properly matching the plus (+) and minus (-)
signs.
• Batteries that have run out of energy must be removed from the toy.
• Do not short-circuit the supply terminals.
• Do not use more batteries than recommended.
• Do not dispose of batteries in fire, as batteries may explode or leak.
• Remove batteries from the toy if it will not be used for an extended period
of time.
CONNECTING THE V.SMILE ART STUDIO™ TO V.SMILE™
NOTE: Before you connect the V.SMILE Art Studio
check to make sure that the V.SMILE
have turned the unit ON, the power indicator light (ON Button)
should glow. If the ON Button does not glow, check to see the
adaptor is connected, or that the batteries are installed correctly.
If the batteries are not installed correctly, the V.SMILE
Learning System will not function and damage to the unit could
result. Make sure that the TV and the unit are turned OFF before
you begin making connections.
™
to V.SMILE
™
is working. Once you
™
,
™
TV
4