Getting Started; Battery Installation; Battery Notice - VTech 80-032301 - Write Learn SMARTBOARD User Manual

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of the
unit.
3. Open the battery cover.
4. Install 3 new "AA" (AM-3/LR6) batteries into the
compartment as illustrated. (The use of new,
alkaline batteries is recommended for maximum
performance.)
5. Replace the battery cover.

BATTERY NOTICE

• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be
used for an extended period of time
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended
are to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
3