Features And Specifications For The Hs20 Type 8843 For A Non-Nebs/Etsi Environment; Bladecenter T Unit - IBM 87302RU Planning And Installation Manual

Features and specifications for the HS20 Type 8843 for a
non-NEBS/ETSI environment
Table 3 provides a summary of the features and specifications of the BladeCenter
HS20 Type 8843 blade server operating in a non-NEBS/ESI environment.
Note: Power, cooling, removable media drives, external ports, and advanced
Table 3. 8843 Features and specifications
Microprocessor:
Supports up to 2 microprocessors
v Intel Xeon DP processor
v 1 MB ECC L2 cache
v 800 MHz front-side bus (FSB)
Memory:
v Four double data rate (DDR)
PC1600 sockets
v Minimum: 512 MB
v Maximum: 8 GB
v Type: 2-way interleaved, DDR,
PC3200, ECC SDRAM registered
x4 (Chipkill) dual inline memory
modules (DIMMs) only
Notes:
1. PC3200 DIMMs are
backward-compatible and can
function in the PC1600 sockets
2. Chipkill is available for DIMMs
with 512 MB or greater
v Supports 512 MB, 1 GB, 2 GB, and
4 GB DIMMs
Drives:
v Support for up to two Ultra320
SCSI hot-swap hard disk drives
available in the optional SCSI
storage expansion unit
Note: The operating system in the blade server must provide USB support for the
system management are provided by the BladeCenter T Types 8720 and
8730 units.
Size:
v Height: 24.5 cm (9.7 inches)
v Depth: 44.6 cm (17.6 inches)
v Width: 2.9 cm (1.14 inches)
v Maximum weight: 5.4 kg (12 lb)
Integrated functions:
v Two Gigabit Ethernet controllers
v ATI Rage XL video controller
v Light path diagnostics
v Local service processor
v IDE drive controller
v RS-485 interface for
communication with the
management module
v USB buses for communication
with keyboard, mouse, CD-ROM
drive, and external diskette drive.
Predictive Failure Analysis (PFA)
alerts:
v Microprocessor
v Memory
v Hard disk drives
Electrical input:
v Input voltage: 12 V dc
blade server to recognize and use the keyboard, mouse, CD-ROM, and
external diskette drive. The BladeCenter T unit uses USB for
communications with these devices.
Environment:
v Air temperature:
– Blade server on: 10° to 35° C
(50° to 95° F). Altitude: 0 to 914
m (2998.69 ft)
– Blade server on: 10° to 32° C
(50° to 95° F). Altitude: 914 m to
2134 m (2998.69 ft to 7000 ft)
– Blade server off: -40° to 60° C
(-40° to 140° F)
v Humidity:
– Blade server on: 8% to 80%
– Blade server off: 5% to 80%
Chapter 2. BladeCenter T unit components
19