Safety Information; Electrical Safety; Class 1 Laser Product - Asus P2-M3A3200 User Manual

Safety information

Electrical safety

• To prevent electric shock hazard, disconnect the power cable from the electric
outlet before relocating the system.
• When adding or removing any devices to or from the system, contact a
qualified service technician or your retailer. Ensure that all the power cables for
the devices are unplugged before the signal cables are connected. If possible,
disconnect all the power cables from the existing system before you add or
remove a device to or from the system.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
Operation safety
• Before installing devices into the system, carefully read all the documentation
that comes with the package.
• Before using the product, ensure that all the cables are correctly connected
and the power cables are not damaged. If you detect any damage, contact
your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets, and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product
in any area where it may become wet. Place the product on a flat and stable
surface.
• Do not block the air vents on the chassis. Always provide proper ventilation for
this product.
• We recommend that you use this product in environments with an ambient
temperature below 40˚C.
• If you encounter technical problems with this product, contact a qualified
service technician or your retailer.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
VORSICHT: Explosionsgetahr bei unsachgemäßen Austausch der Batterie.
Ersatz nur durch denselben oder einem vom Hersteller empfohlenem
ähnljchen Typ. Entsorgung gebrauchter Batterien nach Angaben des
Herstellers.
Lithium-Ion Battery Warning
LASER PRODUCT WARNING

CLASS 1 LASER PRODUCT

vii