Detaching Unit From Dolly; Maintenance; Storage - Craftsman 16636 - 5 Gal. Air Compressor Owner's Manual

Detaching unit from dolly
Do not use the dolly for any other means other than transporting this air compressor.
Do not move air compressor/dolly combo without tightening the knob that safely secures the compressor to the dolly.
Removing the air compressor from the dolly:
1. Turn off the compressor and unplug it from the power
source.
2. Turn the knob on the bottom of the dolly counter-
clockwise, (as viewed from the bottom), until the knob
releases from the air compressor. (This should be 1-2
revolutions)
3. While holding the dolly cart handle with one hand,
lift up on the air compressor handle to remove the
compressor.
Attaching the air compressor to the dolly:
1. Turn off the compressor and unplug it from the power
source.
2. Align the compressor's rubber isolators with the
depressions in the dolly frame.
3. Insert knob bolt into the air compressor and rotate
clock-wise, (as viewed from the bottom), until tight.
(If the compressor is not properly aligned onto the
frame the knob will not tighten. Reposition compressor
and try again.)
Maintenance
NOTE:
Any service procedure not covered in the
maintenance schedule should be performed by qualified
service personnel. Contact your local authorized Sears
or another qualified service dealer.
The air compressor should be turned off, unplugged from
the power source, air bled from the tank and allowed
time to cool before any maintenance is performed.
To ensure efficient operation and longer life of the air
compressor unit, a routine maintenance schedule should
be followed. The following schedule is geared toward
a consumer whose compressor is used in a normal
working environment on a daily basis.
Items to Check/Change
Check Tank Safety Valve
Overall Unit Visual Check
Check Air Filter
Drain Tank
Check Power Cord for Damage
Change Oil
Check Oil Level
Before each use
or daily
X
X
X
X
X
after first 50 hours
after every 100 hours
X
Storage
For storing the air compressor, be sure to do the following:
1. Turn the unit off and unplug the power cord from the
receptacle.
2. Remove all air hoses, accessories, and air tools from
the air compressor.
3. Perform the daily maintenance schedule.
4. Open the drain valve to bleed all air from the tank.
5. Close the drain valve.
6. Store the air compressor in a clean and dry location.