1. Manuals
  2. Brands
  3. PowerTec Manuals
  4. Saw
  5. HTS1045
  6. Owner's manual

PowerTec HTS1045 Owner's Manual

4.5" handheld wet tile saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
4.5" Handheld Wet Tile Saw
Visit us on the web at www.powertecproducts.com
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
Model No.HTS1045
24-0618

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HTS1045 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PowerTec HTS1045

Summary of Contents for PowerTec HTS1045

  • Page 1 Model No.HTS1045 Owner's Manual 4.5" Handheld Wet Tile Saw Visit us on the web at www.powertecproducts.com You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future reference.

  • Page 2: Table Of Contents

    Compatible Blades Range in Size from ..4-3/8" to 4-1/2" General Tool Safety • POWERTEC Saw Blades Compatible With HTS1045 ..Tool Specific Warnings ..POWERTEC 14000/14003/14005/14007/14010 Blade Arbor .

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES • Wear proper face mask or dust mask if operation is dusty. WARNING • Be alert and think clearly. Never operate power tools when tired, For your own safety, read all of the rules and precautions intoxicated or when taking medications that cause drowsiness. before operating this Tile Saw.

  • Page 4: Specific Safety Warnings

    SPECIFIC SAFETY WARNINGS GUIDELINES FOR EXTENSION CORD USE DANGER WARNING Risk of serious injury: Keep hands and fingers away from the spinning Tile Saw blade. Be aware of the blade at all times. The use of an extension cord is not recommended. The use of any extension cord will cause some drop in voltage and loss of WARNING power.

  • Page 5: Contents

    4.5" Continuous Diamond Rim Wet Cutting Blade Figure 1 HTS1045 FEATURES HTS1045 FEATURES AND FUNCTIONS Before using the Tile Saw, become familiar with all the operating features and safety rules. • GFCI Plug protects against the occurrence of ground fault •...

  • Page 6: Assembly

    ASSEMBLY INSTALL THE BLADE See Figure 2. 9. Tighten blade bolt securely by turning it counterclockwise the WARNING Hex T-Wrench (D). NOTE: Never use a blade too thick to allow the outer blade ALWAYS Unplug the Tile Saw before installing or washer to engage with the flat on the spindle.

  • Page 7: Operation

    OPERATION CHECK RESET BUTTON DANGER Push RESET on Tile Saw Plug to reset the plug. Risk of serious injury. Keep hands and fingers away from the spinning Tile Saw blade. Be aware of the blade at all times. DANGER Risk of serious injury: Keep hands and fingers away from the Risk of serious personal injury.
  • Page 8 ADJUSTING THE BLADE DEPTH OPERATING THE TILE SAW WARNING WARNING Risk of serious injury. Always maintain control of the Tile To reduce the risk of injury, always ensure the switch is OFF Saw when lifting Tile Saw from the workpiece. Ensure the and Tile Saw is unplugged from power source.
  • Page 9 Make Straight Cuts: Make L-Cuts: L-Cuts are cuts that remove a part of the tile so that the tile fits in a corner, around an electrical or inspection box, or 1. Adjust the Angle Gauge to 9. When cut is complete, a piece of molding, and it is achieved by making two separate cuts.

  • Page 10: Maintenance

    MAINTENANCE PRODUCT CARE WARNING Avoid using solvents when cleaning plastic parts. Most plastics When servicing, use only identical replacement parts. Use are susceptible to damage from various types of commercial of any other parts may create a hazard or cause Tile Saw solvents and may be damaged by their use.

  • Page 11: Troubleshooting

    TROUBLESHOOTING Follow all safety precautions when servicing unit SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION 1. Tile Saw not plugged in Plug in Tile Saw Release Trigger Switch on Tile Saw and push reset button 2. GFCI tripped on GFCI plug 3. Tile Saw will not run (plugged in; Trigger Release Trigger Switch on Tile Saw and push reset button on the GFCI plug Switch pressed)

  • Page 12: Warranty

    30-DAY SATISFACTION GUARANTEE POLICY During the first 30 days after the date of purchase, if you are dissatisfied with the performance of this POWERTEC tool for any reason, you may return the tool to the retailer from which it was purchased for a full refund or exchange. You must present proof of purchase and return all original equipment packaged with the original product.

Table of Contents