Features; Assembly - Craftsman 10137 - 1/2 in. Corded Hammer Drill Operator's Manual

KNOW
YOUR HAMMER DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
AUXILIARY HANDLE
Your drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
DiRECTiON OF ROTATION SELECTOR
(FORWARD/REVERSE)
Your drill has a direction of rotation (forward/reverse) selector
located above the variable speed switch for changing the
direction of bit rotation.
HAMMER SPEED
Your hammer drill has a hammer speed of 0-16,000 BPM
(Blows Per Minute). Blows Per Minute is the number of
impacts per minute that the tool delivers in hammer mode.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
LEVELS
Levels are located on the top and end of the motor hous-
ing to help keep the drill bit level during use.
LiVE TOOL iNDiCATOR
The live tool indicator is located on the handle of the drill
and indicates that the tool is connected to a power sup-
ply.
LOCK=ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
SPINDLE LOCK
The spindle lock keeps the chuck from turning while
installing and removing bits.
VARIABLE SPEED SWITCH
The variable speed switch delivers higher speed with
increased pressure and lower speed with decreased
pressu re.
UNPACKING
This product has been shipped completely assembled.
[] Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
[] Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LiST
Hammer Drill with Auxiliary Handle Assembly
Depth Gauge Rod
Carrying Case
Operator's Manual
A
A
A
WARNING: If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING: Do not attempt to modify this tool or
create accessories not recommended for use with
this tool. Any such alteration or modification is mis-
use and could result in a hazardous condition lead-
ing to possible serious personal injury.
WARNING: Do not connect to power supply until
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.