Craftsman 10137 - 1/2 in. Corded Hammer Drill Operator's Manual page 6

Thefollowing signal w ordsandmeanings a reintended to explain the levels ofriskassociated w iththis
product.
SYMBOL SIGNAL MEANING
Indicates an imminently hazardous situation, which, if not avoided, will
DANGER:
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
WARNING: result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
CAUTION: result in minor or moderate injury.
CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service tech-
nician. For service we suggest you return the product to
your nearest AUTHORIZED SERVICE CENTER for repair.
When servicing, use only identical replacement parts.
A
WARNING: To avoid serious personal injury, do not
attempt to use this product until you read thoroughly
and understand completely the operator's manual.
Save this operator's manual and review frequently for
continuing safe operation and instructing others who
may use this product.
,_ WARNING"
The operation of any power tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles, safety glasses with side shields, or a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS