Message
No Variable
•
No variable specifi ed within a
graph function being used for
Dynamic Graph.
•
No variable within a Solve
equation.
Com ERROR
•
Problem with cable connection or
parameter setting during program
data communications.
Transmit
•
Problem with cable connection
ERROR
or parameter setting during data
communications.
Receive
•
Problem with cable connection
ERROR
or parameter setting during data
communications.
Memory Full
•
Memory of receiving unit
became full during program data
communications.
Time Out
•
A Solve calculation or integration
calculation was unable to satisfy
convergence conditions.
Circular
•
There is a circular reference
ERROR
(such as "=A1" in cell A1) in the
spreadsheet.
Please
•
The connection was dropped for
Reconnect
some reason while updating the
operating system.
Too Many Data •
The number of data items is too
large.
Fragmentation
•
Memory must be optimized before
ERROR
any more data can be stored.
Invalid Name
•
The fi le name you input includes
invalid characters.
-1-3
Error Message Table
Meaning
20070201
Countermeasure
•
Specify a variable for the graph
function.
•
Input a Solve equation that
includes a variable.
•
Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are confi gured correctly.
•
Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are confi gured correctly.
•
Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are confi gured correctly.
•
Delete some data stored in the
receiving unit and try again.
•
If you are performing a Solve
calculation, try changing to the
initial default estimated value.
•
If you are performing an
integration calculation, try
changing to a larger
•
Change cell contents to remove
the circular references.
•
Reconnect and try again.
•
Delete unneeded data.
•
Optimize memory.
•
Use the correct characters to
input a valid fi le name.
tol
value.