Casio CFX9850GBPLUS User Manual page 329

After setting all the parameters, use c to move the highlighting to "Execute" and then press
one of the function keys shown below to perform the calculation or draw the graph.
• 1 (CALC) ... Performs the calculation.
• 6 (DRAW) ... Draws the graph.
Calculation Result Output Example
2
.................................
p
.................................. p-value
df
................................. degrees of freedom
You can use the following graph analysis functions after drawing a graph.
• 1 (CHI) ... Displays
Pressing 1 (CHI) displays the
at the corresponding location in the graph (unless the location is off the graph screen).
Press J to clear the
• 2 (P) ... Displays p-value.
Pressing 2 (P) displays the p-value at the bottom of the display without displaying the
pointer.
Press J to clear the p-value.
# Pressing 6 (' MAT) while a calculation
result is displayed enters the Matrix Editor,
which you can use to edit and view the
contents of matrices.
# The following V-Window settings are used for
drawing the graph.
Xmin = 0, Xmax = 11.5, Xscale = 2,
Ymin = –0.1, Ymax = 0.5, Yscale = 0.1
6-5-19
Tests
2
value
2 value.
2
value at the bottom of the display, and displays the pointer
2 value.
20070201
# Executing an analysis function automatically
2
stores the and p values in alpha variables
C and P, respectively.