PIONEER DJ DDJ-RZ Service Manual
PIONEER DJ DDJ-RZ Service Manual

PIONEER DJ DDJ-RZ Service Manual

Dj controller

Advertisement

Quick Links

DJ Controller
DDJ-RZ
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
DDJ-RZ
UXJCB
DDJ-RZ
LSYXJ
DDJ-RZ
XJCN
This product is based on the DDJ-SZ, and some operation buttons are added to provide
optimal operations as a dedicated control unit for "rekordbox dj," an application having
DJ play functions.
In this service manual, any difference from the DDJ-SZ is described in each
corresponding section.
For matters not described in this manual, refer to the service manual of the DDJ-SZ.
THIS SERVICE MANUAL SHOULD BE USED TOGETHER WITH THE FOLLOWING MANUAL(S).
Model No.
DDJ-SZ/UXJCB
DDJ-RZ/UXJCB
For SPECIFICATIONS and PANEL FACILITIES, refer to the operating instructions.
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
Pioneer DJ Corporation 2015
Power Requirement
AC 110 V to 240 V
AC 110 V to 240 V
AC 220 V
Order No.
RRV4510
DDJ-SZ/UXJCB
RRV4633
SCHEMATIC DIAGRAM, PCB CONNECTION DIAGRAM, PCB PARTS LIST
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
DDJ-RZ
Remarks
K-MZV OCT.
ORDER NO.
RRV4629
Remarks
2015 Printed in Japan

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DDJ-RZ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PIONEER DJ DDJ-RZ

  • Page 1 PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 Pioneer DJ Corporation 2015 K-MZV OCT. 2015 Printed in Japan...
  • Page 2: Table Of Contents

    1.2 NOTES ON REPLACING (Refer to Service Manual for DDJ-SZ) 1.3 SERVICE NOTICE (Refer to Service Manual for DDJ-SZ) 1.4 DIFFERENCES BETWEEN THE DDJ-RZ and DDJ-SZ ....................3 SPECIFICATIONS(Refer to Operating Instructions for DDJ-RZ) 3. BASIC ITEMS FOR SERVICE...............................3 3.1 CHECK POINTS AFTER SERVICING (Refer to Service Manual for DDJ-SZ) 3.2 JIGS LIST...
  • Page 3: Service Precautions

    [1.1 NOTES ON SOLDERING], [1.2 NOTES ON REPLACING], [1.3 SERVICE NOTICE], refer to Service Manual for DDJ-SZ. 1.4 DIFFERENCES BETWEEN THE DDJ-RZ and DDJ-SZ The differences in the operating elements on the control panel of the DDJ-RZ from those of the DDJ-SZ are as follows: 1 QUANTIZE buttons added...
  • Page 4: Pcb Locations

    FAD1 ASSY FAD4 ASSY • Jog dial Section (top view) • Chassis Section (top view) JFLL ASSY or JFLR ASSY JLL4 ASSY JLL3 ASSY POWER SUPPLY ASSY JLR4 ASSY JLR3 ASSY JLL1 ASSY JLL2 ASSY JLR1 ASSY JLR2 ASSY DDJ-RZ...
  • Page 5 DWX3784 2..SEQL ASSY DWX3763 2..JLR3 ASSY DWX3785 2..QUAL ASSY DWX3764 2..JLR4 ASSY DWX3786 2..QUAR ASSY DWX3765 2..SEQR ASSY DWX3766 1..MIXER ASSY DWM2587 > 2..MXRA ASSY DWX3753 POWER SUPPLY ASSY DWR1463 2..JOGTL ASSY DWX3754 2..PSWB ASSY DWX3755 2..JOGTR ASSY DWX3756 DDJ-RZ...
  • Page 6: Block Diagram

    4. BLOCK DIAGRAM When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. : The power supply is shown with the marked box.
  • Page 7: Overall Block Diagram (Refer To Service Manual For Ddj-Sz) 4.3 Power Block Diagram (Refer To Service Manual For Ddj-Sz) 4.4 Matrix Table

    TAP_R LED_SEG14 GRID SLIDE_R DECK 4 AUTO_R FX PARAM1_R LOAD_R(Blue) TEMPO LED_SEG15 SYNC_R CUE_R PLAY_R CENSOR_R SLIP_R RANGE_R LED_SEG16 CH3_LV_8 CH1_LV_8 CH2_LV_8 CH4_LV_8 MasL_LV_8 MasR_LV_8 LED_SEG17 CH3_LV_9 CH1_LV_9 CH2_LV_9 CH4_LV_9 MasL_LV_9 MasR_LV_9 LED_SEG18 CH3_LV_10 CH1_LV_10 CH2_LV_10 CH4_LV_10 MasL_LV_10 MasR_LV_10 DDJ-RZ...
  • Page 8: Diagnosis

    [5.4 VOLTAGE MONITORING CIRCUIT], [5.5 ABOUT PROTECTOR], refer to Service Manual for DDJ-SZ. 5.2 TROUBLESHOOTING The procedures and content for the DDJ-RZ are the same as those for the base model (DDJ-SZ). For details, refer to the service manual of the DDJ-SZ.
  • Page 9: Basic Operation Check Using Rekordbox Dj

    Install the driver software that enables audio output from the PC beforehand. The operating environment of the PC required for installation of rekordbox dj is shown below. • For the latest information on this unit’ s dedicated driver software, see the Pioneer DJ site below. http://www.pioneerdj.com/ •...
  • Page 10 2 Turn the rotary selector and select the track. 3 Press the [DECK1] button. 4 Press the [LOAD] button to load the selected track onto the deck. DDJ-RZ...
  • Page 11 5 Turn the [MASTER LEVEL] (1) control to adjust the audio level of the speakers. Monitoring sound with headphones Set the positions of the controls, etc., as shown below. 1 Press the headphones [CUE] (9) button for the channel 1. 2 Turn the [HEADPHONES LEVEL] (8) control. DDJ-RZ...
  • Page 12: Service Mode

    Press and hold the left DECK "SYNC" button and the left "SHIFT" button and the left "DECK 3" button, then Power-ON. "DECK 3" button, then Power-ON. Measurement Mode 2-1 Measurement Mode 2-2 Jog dial Rotation Time Volume value fluctuation measurement mode check mode DDJ-RZ...
  • Page 13: Description Of Test Mode

    The version numbers 0.00 to 9.99 will be indicated. The green LED at the bottom of the left MASTER level indicator lights to indicate that the current version of the firmware being displayed is for the DDJ-RZ. x.xx Indicating that the version being...
  • Page 14 Each operating element on decks 1 to 4 is represented by the corresponding channel level indicator; for a CH1 operating element, the CH1 channel level indicator is used, for a CH2 operating element, the CH2 channel level indicator is used, and so on. DDJ-RZ...
  • Page 15 When the SYNC buttons on the left and right decks are simultaneously held pressed, the LEDs of these buttons light. After resetting is completed, the pads on both decks light in blue. When resetting has failed, the SYNC buttons on both decks flash. Simultaneously hold both SYNC buttons pressed for 1 sec. DDJ-RZ...
  • Page 16 Simultaneous pressing of the CH1 Headphones CUE and CH2 Headphones CUE buttons stores the setting values in the serial flash memory. · If the CH1 Headphones CUE and CH2 Headphones CUE buttons are pressed without setting the maximum and minimum values, an error indication will be displayed. DDJ-RZ...
  • Page 17: Error Indication

    Left DECK LOAD PREPARE button Deleting a setting value Left DECK PLAY/PAUSE f button Acquiring an A/D conversion value Right DECK BACK button Performance pads Displaying a setting value Right DECK LOAD PREPARE button Level indicator Displaying a setting value DDJ-RZ...
  • Page 18 Note: To weigh a pad down, be sure to place a weight (12 mm dia.) on the center of the pad, with the convex part (contact area dia.: 10 mm) facing downward. Weight for pad calibration Be sure to place a weight on the center of the pad. Performance pad DDJ-RZ...
  • Page 19 Simultaneous pressing of the CH3 Headphones CUE and CH4 Headphones CUE buttons stores the setting value in the serial flash memory. · If the CH3 Headphones CUE and CH4 Headphones CUE buttons are pressed without setting the A/D conversion value, an error indication will be displayed. DDJ-RZ...
  • Page 20 OSC SAMPLER SELECT (SIREN) SOUND COLOR FX (FILTER) OSC SAMPLER SELECT (HONE) 15 16 1 2 3 4 9 10 11 12 5 6 7 8 13 14 15 16 Indication example of the level indicators (when the setting value is 123) DDJ-RZ...
  • Page 21: Operation Procedure

    : Pads 5 to 8 on the left deck SLICER mode : Pads 1 to 4 on the right deck SAMPLER mode : Pads 5 to 8 on the right deck 3 The level indicator oscillates in response to force applied to the pad. DDJ-RZ...
  • Page 22 [HOTCUE] [PAD FX1] [SLICER] [SAMPLER] DDJ-RZ...
  • Page 23 • The number of sessions (1–4) in which the time required for slowdown was 100 msec or shorter is indicated with the SLIP REVERSE, SLIP, BEAT d (TAP), and LOAD (Blue) buttons on the same deck as the Jog dial being tested is located. Any such sessions exceeding five will not be counted. DDJ-RZ...
  • Page 24 Jog dial surpasses 0.5 times normal speed. Real-time rotation speed of the Jog dial (tenth digit) Measurement result (*** msec) Real-time rotation speed of the Jog dial (unit's digit) (Example) The figure below shows the result of 123 msec. DDJ-RZ...
  • Page 25 To change faders/controls to be tested, turn the rotary selector clockwise or counterclockwise. To start monitoring or reset an A/D conversion value, press the rotary selector. 10 11 39 40 The following details Each Channel TRIM, HI, MID, LOW, COLOR Each Channel Fader Crossfader Crossfader Curve DDJ-RZ...
  • Page 26 The USB-A buttons on decks 2 and 4 light. 3. Press the rotary selector to start monitoring A/D conversion values. If the A/D conversion value when the rotary selector is pressed is 760, that value becomes the reference and fluctuations in A/D values are monitored. DDJ-RZ...
  • Page 27 9. If the A/D value becomes 757, the lit LEDs of the MASTER level indicator change, as shown in the figure below. 10. To reset the monitored A/D values, press the rotary selector. All LEDs will go dark. The A/D conversion value when the rotary selector is pressed will become a new reference value. DDJ-RZ...
  • Page 28: About The Device

    MAIN Assy V7401 JFLL Assy DEL1073 VACUUM FLUORESCENT DISPLAY V7601 JFLR Assy IC7301 CDCL Assy AD7147ACPZ500RL7 Capacitance Sensor for NEEDLE SEARCH pad IC6301 CDCR Assy PIC UCOM DYW1858 Touch detection for JOG DIAL IC8601 JOGTL Assy IC8701 JOGTR Assy DDJ-RZ...
  • Page 29: Disassembly

    (rubber) (rubber) White DAA1309 DAA1326 DNK5981 DAA1212 DAC2684 DAC2685 DNK5888 ×6 ×5 ×2 ×2 ×5 ×5 ×5 White White White White DAC2685 Silver Black Black Black White DAC2684 Black DAA1333 DAA1302 ×7 ×2 White White White DNK5888 Black Black DDJ-RZ...
  • Page 30: Exterior Section

    (3) Remove the Plate/MIX by removing the Plate/MIX ×18 18 screws. Note: Neither the Plate/DEL nor the Plate/DER is required to be detached during repair of the internal unit. ×2 (4) Remove the 2 Shafts/EXT. (5) Remove the 6 Lenses/LVL. ×6 DDJ-RZ...
  • Page 31 • MAIN Assy (1) Disconnect the 2 connectors. (CN1001, 3901) (2) Remove the 1 screw. (BPZ30P080FNI) CN3901 (3) Remove the Shield Plate/USB by removing the 3 screws. (BBZ30P080FTB) Cord clamper Screw tightening order Shield Plate/USB CN1001 • Bottom view DDJ-RZ...
  • Page 32 (BBZ30P060FTB) CN7005 CN6005 CN7001 CN6001 • Bottom view ×8 (5) Remove the 8 screws. (BPZ30P080FNI) (6) Release the flexible cables by unhooking the 8 hooks. Screw tightening order The other screws are random order. ×2 ×2 • Bottom view DDJ-RZ...
  • Page 33 (12) Remove the Mixer Section. (13) Remove the DEUP, DEUPR, two KSWB, Jog dial Section two SLDB, PADL and PADR Assemblies. Mixer Section DEUP Assy Jog dial Section SLDB Assy DEUPR Assy PADL Assy KSWB Assy SLDB Assy KSWB Assy PADR Assy DDJ-RZ...
  • Page 34: Fader Section

    12 screws. (BPZ30P080FNI) • Bottom view Barrier Barrier [4] Fader Section Refer to the service manual of DDJ-SZ. [5] Mixer Section Refer to the service manual of DDJ-SZ. [6] Jog dial Section Refer to the service manual of DDJ-SZ. DDJ-RZ...
  • Page 35: Each Setting And Adjustment

    8.2 UPDATING OF THE FIRMWARE The procedures and content of firmware updating for the DDJ-RZ are the same as those for the base model (DDJ-SZ). For details on how to update the firmware, refer to the service manual of the DDJ-SZ.
  • Page 36: Exploded Views And Parts List

    NSP 11 Warranty See Contrast table (2) NSP 12 Leaflet DRM1410 NSP 13 rekordbox dj license key DXA2304 (2) CONTRAST TABLE DDJ-RZ/UXJCB, LSYXJ and XJCN are constructed the same except for the following: Mark Symbol and Description DDJ-RZ/UXJCB DDJ-RZ/LSYXJ DDJ-RZ/XJCN Power Cord...
  • Page 37: Top And Chassis Section

    9.2 TOP and CHASSIS SECTION DDJ-SZ/UXJCB and DDJ-RZ/UXJCB, LSYXJ, XJCN are constructed the same except for the following: For convenience of the system, the part names for the DDJ-RZ are simplified. The part names in parentheses are those for the DDJ-SZ.
  • Page 38: Terminal Section

    9.4 CONTROL PANEL SECTION DDJ-SZ/UXJCB and DDJ-RZ/LSYXJ, UXJCB, XJCN are constructed the same except for the following: For convenience of the system, the part names for the DDJ-RZ are simplified. The part names in parentheses are those for the DDJ-SZ.
  • Page 39 MAIN CN6008 MAIN CN6007 DDJ-RZ...
  • Page 40: Mixer Section

    9.5 MIXER SECTION DDJ-SZ/UXJCB and DDJ-RZ/LSYXJ, UXJCB, XJCN are constructed the same except for the following: For convenience of the system, the part names for the DDJ-RZ are simplified. The part names in parentheses are those for the DDJ-SZ. Mark...
  • Page 41: Panel And Button Section

    9.6 PANEL and BUTTON SECTION 1/2 ×3 XJCN5 only ×4 2/2 ×3 ×2 DDJ-RZ...
  • Page 42: Jog Dial Section

    9.7 JOG DIAL SECTION DDJ-SZ/UXJCB and DDJ-RZ/LSYXJ, UXJCB, XJCN are constructed the same except for the following: For convenience of the system, the part names for the DDJ-RZ are simplified. The part names in parentheses are those for the DDJ-SZ.

Table of Contents