SAFETY INSTRUCTIONS Read and understand this entire manual before using this product. Keep these instructions for future reference. General Instructions: • Do not pick up hazardous dust that may • Use water under 40°C to clean the unit pose a health risk. effectively.
Page 4
pulling the plug violently when moving the Do Not Pick Up the Following: machine. • Dry dust • Do not use the machine if the power cord • Large amounts of powder or plug is damaged. • Large amounts of sand or stones •...
Page 5
KNOW HOW OF THE MACHINE PRODUCT OVERVIEW COMPONENTS LIST: 1. Switch 2. Handle 3. Power cord hook 4. Power Cord 5. Clean water tank 1. Switch 7. Dirty water tank 6. Small brush 7. Dirty water tank 8. Brush hook 9. Hose 10. Big brush 8.
PREPARATIONS BEFORE USE PREPARATIONS BEFORE USE PREPARATIONS BEFORE USE PREPARATIONS BEFORE USE Open the clean water tank by Insert the handle and cable Put the hose hook in the correct turning the cover in anticlockwise hook into the machine. position to push it from right to Open the clean water tank by Insert the handle and cable Put the hose hook in the correct...
USING THE SPOT CLEANER HOW TO USE HOW TO USE HOW TO USE HOW TO USE Select the desired wash tool Plug the power cord and press Press the water-spray button to suitable for the flooring/surface ON/OFF button. spray water. Select the desired wash tool Plug the power cord and press Press the water-spray button to...
Page 8
TO CLEAN STUBBORN STAINS HOW TO CLEAN STUBBORN STAIN Use fabric detergent to clean stubborn stains. Mix water and detergent in the correct proportion and fill the clean water tank up to the full line. Then, Use fabric detergent to clean stubborn stains. Make the water and detergent with a certain propo install the clean water tank back onto the machine.
CLEANING AND MAINTENANCE CLEANING CARE AND MAINTENANCE To prolong the life of your spot and stain cleaner and prevent blockages or CLEANING CARE AND MAINTENANCE other issues, follow this guide: To prolong the life of your spot & stain cleaner and prevent blockages or problems occurring follow this •...
Page 10
Remove the dirty water tank from the Empty the dirty water tank after every Open the dirty water tank and take out Remove the dirty water tank Empty the dirty water tank after Open the dirty water tank and Remove the dirty water tank from the Empty the dirty water tank after every Open the dirty water tank and take out main cleaner.
TROUBLESHOOTING If the device isn’t working properly, try to fix the problem using the steps below. If the issue persists, contact customer service. Never attempt to repair an electrical device yourself. Problem Cause Solution Cleaner not working after The plug isn’t plugged in Turn it off and try to plug turning on properly...
Need help?
Do you have a question about the Magivaac SPC450 and is the answer not in the manual?
Questions and answers