3onedata Logicbus GW1101-1D(RS-485)-TB-P(12-48VDC) Quick Installation Manual

GW1101-1D(RS-485)-TB-P(12-48VDC)
Modbus Gateway
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili,
Shenzhen
www.3onedata.com
Website:
+86 0755-26702688
Tel:
+86 0755-26703485
Fax:
Package Checklist
Please check whether the package and accessories are intact
while using the device for the first time.
1. Modbus gateway 2. Power adapter
3. Straight-through cable 4. Certification
5. Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
Product Overview
The product is managed wall-mounted industrial MODBUS
gateway. The model is GW1101-1D(RS-485)-TB-P(12-48VDC)
(1 RS-485/422 serial port + 1 100M copper port + 1
12~48VDC power supply).
Panel Design
Top view, main view and bottom view
Nanshan District,
Rear view
1. 100M copper port
2. Reset button
3. Terminal block for power input
4. Power supply indicator PWR
5. Running indicator RUN
6. Copper port indicator LINK
7. Serial port transmitting indicator
8. Serial port receiving indicator
9. Lugs
10. RS-485/422 serial port
11. Corresponding DIP switch of COM
12. Cover plate for DIP switch
Mounting Dimension
Unit: mm
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the