schmersal AZM 161SK-12/12K-024 Manual
schmersal AZM 161SK-12/12K-024 Manual

schmersal AZM 161SK-12/12K-024 Manual

Solenoid interlock

Advertisement

Quick Links

INSTRUKCJE UŻYTKOWANIA I MONTAŻU
Solenoid interlock AZM 161SK-12/12K-024

Table of Contents

1 About this document
1.1 Function
1.2 Target group of the operating instructions: authorised qualified personnel
1 About this document
1.1 Function
This document provides all the information you need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the switchgear. The operating instructions enclosed with the device must always be
kept in a legible condition and accessible.
1.2 Target group of the operating instructions: authorised qualified
personnel
1-19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AZM 161SK-12/12K-024 and is the answer not in the manual?

Questions and answers

Summary of Contents for schmersal AZM 161SK-12/12K-024

  • Page 1: Table Of Contents

    INSTRUKCJE UŻYTKOWANIA I MONTAŻU Solenoid interlock AZM 161SK-12/12K-024 Table of Contents 1 About this document 1.1 Function 1.2 Target group of the operating instructions: authorised qualified personnel 1.3 Explanation of the symbols used 1.4 Appropriate use 1.5 General safety instructions 2 Product description 2.1 Ordering code...
  • Page 2: Explanation Of The Symbols Used

    The user must observe the safety instructions in this operating instructions manual, the country specific installation standards as well as all prevailing safety regulations and accident prevention rules. Further technical information can be found in the Schmersal catalogues or in the online catalogue on the Internet: products.schmersal.com.
  • Page 3 Product type description: AZM161 (1)-(2)(3)K(4)-(5)/(6)-(7)(8) Screw connection Cage clamps Connector plug M12 11/03 Magnet: 1 NO contact, 1 NC contact / Actuator: 3 NC contacts with connector plug 12/03 Magnet: 1 NO contact, 2 NC contact / Actuator: 3 NC contacts 12/11 Magnet: 1 NO contact, 2 NC contacts / Actuator: 1 NO contact, 1 NC contact with connector plug...
  • Page 4: Special Versions

    Us: 24 VAC/DC 110/230 Us: 110/230 VAC without without LED with LED (only for Us: 24 VAC/DC) 2.2 Special versions For special versions, which are not listed in the ordering code, these specifications apply accordingly, provided that they correspond to the standard version. 2.3 Purpose The solenoid interlock has been designed to prevent in conjunction with the control part of a machine, movable safety guards from being opened before hazardous conditions have been eliminated.
  • Page 5: Technical Data

    2.6 Technical Data Approvals - Standards Certificates cULus General data Standards EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 Coding level according to EN ISO 14119 niskie Working principle elektromechaniczne Housing material Tworzywo sztuczne, tworzywo​ ​ termoplastyczne​ ​ wzmocnione​ ​ włóknem​...
  • Page 6: Mechanical Data

    Please note: Możliwość zastosowania po dokonaniu wykluczenia błędów w postaci niebezpiecznego uszkodzenia 1-kanałowej mechaniki i odpowiednim zabezpieczeniu przed manipulacją. Performance Level, up to Category Note for 2-channel use and with suitable logic unit. Mission time 20 Year(s) Safety classification - Guard locking function Performance Level, up to Note (Performance Level) Information for the safety classification of the guard locking...
  • Page 7 Mechanical data - Dimensions Length of sensor 30 mm Width of sensor 130 mm Height of sensor 90 mm Ambient conditions Degree of protection IP67 Ambient temperature -30 ... +60 °C Storage and transport temperature -30 ... +85 °C Note (Relative humidity) zapobiegający skraplaniu zapobiegający zamarzaniu Protection class...
  • Page 8: Other Data

    Current, Utilisation category AC-15 Voltage, Utilisation category DC-13 24 VDC Current, Utilisation category DC-13 2,5 A Electrical data - Auxiliary contacts Voltage, Utilisation category AC-15 230 VAC Current, Utilisation category AC-15 Voltage, Utilisation category DC-13 24 VDC Current, Utilisation category DC-13 2,5 A Other data Note (applications)
  • Page 9 Legend Safety power shutdown ¢ Solenoid interlock ƒ Guard locking function ¥ Fault exclusion with regard to wiring routing must be observed. If for a certain application the power to unlock version of a solenoid interlock cannot be used, for this exception an interlock with power to lock can be used if additional safety measure need to be realised that have an equivalent safety level.
  • Page 10: Mounting

    3 Mounting 3.1 General mounting instructions Please observe the remarks of the standards EN ISO 12100, EN ISO 14119 and EN ISO 14120. Three mounting holes are provided for fixing the enclosure. The solenoid interlock is double insulated. The use of an earth wire is not authorised.
  • Page 11: Manual Release

    3.3 Manual release (for set-up, maintenance, etc.) Manual release is realised by turning the triangular key by 180° (M5 triangular key available as accessory), so that the locking bolt is pulled into the unlocking position. Please ensure that jamming by external influence on the actuator is avoided.
  • Page 12: Emergency Release (Ordering Suffix -N)

        Triangular key TK-M5 (101100887) available as accessory. 3.4 Emergency release (ordering suffix -N) (Fitting and actuation only from outside the hazardous area) The emergency release should only be used in an emergency. The solenoid interlock should be installed and/or protected so that an inadvertent opening of the interlock by an emergency release can be prevented.
  • Page 13: Electrical Connection

        4 Electrical connection 4.1 General information for electrical connection The electrical connection may only be carried out by authorised personnel in a de-energised condition. If the risk analysis indicates the use of a monitored interlock they are to be connected in the safety circuit with the contacts >...
  • Page 14: Contact Options

    Once the connection has been made, clean any dirt from the inside of the switch and refit the housing cover. The tightening torque of the cover screws is 0.6 Nm. The tightening sequence of the screws is shown in the following illustration.
  • Page 15 Power to unlock Power to lock AZM 161SK-12/12... und AZM 161CC-12/12...     AZM 161SK-12/03... und AZM 161CC-12/03...     Positive break NC contact Monitoring the interlock according to EN ISO 14119 > Actuated Not actuated AZM 161ST-../.. with connector AZM 161ST-12/11...
  • Page 16     AZM 161ST-11/03...       AZM 161...-G with LED Integrated contact kit 12/12 G (with LED) 16-19...
  • Page 17 The 24 V are led internally to contacts 13 and 63. The corresponding signals of the LED display can also be tapped at terminals 14 or 64.   Integrated contact kit 12/03 G (with LED) The 24 V are led internally to contacts 11 and 63. The corresponding signals of the LED display can also be tapped at terminals 12 or 64.
  • Page 18: Set-Up And Maintenance

    Power to unlock System condition Magnet control ¢ ƒ ¥ Power to unlock yellow green yellow Door open 24 V (0 V) Door closed, actuator 24 V inserted, not locked Door closed, actuator inserted and locked Power to lock System condition Magnet control ¢...
  • Page 19: Disposal

    19-19 Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220 Dane zostały starannie sprawdzone. Zdjęcia mogą odbiegać od rzeczywistości. Dalsze dane techniczne znajdują się w instrukcji obsługi. Możliwe są zmiany i błędy techniczne.

Table of Contents