Each Setting And Adjustment; Necessary Items To Be Noted; Updating Of The Firmware - Pioneer DDJ-SP1 Service Manual

5

8. EACH SETTING AND ADJUSTMENT

8.1 NECESSARY ITEMS TO BE NOTED

After repairing, be sure to check the version of the firmware, and if it is not the latest one, update to the latest version.
Perform the each item when the following parts are replaced.
• IC storing firmware and PCB Assy
IC2 (MAIN PCB Assy),
MAIN PCB Assy

8.2 UPDATING OF THE FIRMWARE

Caution:
DO NOT disconnect the USB cable until updating is completed.
Preparations
• Update file for DDJ-SP1
When the downloaded zip file is unzipped, the update file appears. Place the update file on the desktop.
e.g.) DDJ-SP1_V101.jar
• A computer where Java has been installed
If Java has not been installed, please download the Java Runtime Environment (JRE) at: http://java.com and install it
on your computer.
Updating Procedures
Note: Close all applications on your computer before running this updating procedure.
1 Connect the above prepared computer to DDJ-SP1 via the
USB cable included with the product while pressing the
right effect parameter 1 button and right [TAP] button.
2 Make sure of LED flash of the two [SYNC] buttons and
fringe of the two [AUTO LOOP] knobs before releasing
your finger from these buttons.
5
6
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Factory reset
• Be changed user setting to condition before the repair
(when be possible)
3 When the update file for DDJ-SP1 (DDJ-SP1_Vxxx.jar)
is activated, the following dialogue is displayed.
Click the [Start] button.
4 The update of the firmware starts.
DDJ-SP1
6
7
7
8
A
B
C
D
E
F
31
8