Remote Keyless Entry Transmitter; Remote Vehicle Start - Chevrolet CRUZE - 2011 Quick Reference Manual

Hide thumbs Also See for CRUZE - 2011:
Table of Contents

Advertisement

Remote Keyless Entry Transmitter

Unlock
Press to unlock the driver's door. Press
again to unlock all doors.
Lock
Press to lock all doors. The driver's door
will not lock when open if the Unlocked
Door Anti Lock Out feature is activated.
Note: The remote lock and unlock settings can be changed in the Vehicle Settings menu by using
the audio system controls.

Remote Vehicle Start

During a remote start, the vehicle's manual climate control system will operate at the same
setting as when the vehicle was last turned off or the automatic climate control system✦
will default to a heating or cooling mode depending on outside temperature.
Starting the Vehicle
1. Aim the Remote Keyless Entry transmitter at the vehicle. (Transmitter range depends
on operating conditions.)
2. Press and release the
3. Immediately press and hold the
When the vehicle starts, the parking lamps will light and remain on while the engine
is running. The vehicle's doors will be locked. The engine will continue running for
10 minutes.
4. Repeat these steps for a 10-minute time extension. Remote start can be extended
only once.
Before driving, insert the key in the ignition and turn it to the On position.
4
Lock button on the transmitter.
Remote Start button for at least two seconds.
Trunk
Press and hold to unlock the trunk.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle.
The turn signal lamps will flash and the
horn will sound.
Press and hold to activate the alarm. The
turn signal lamps will flash and the horn
will sound until the button is pressed again
or the ignition is turned on.
Remote Vehicle Start✦
Use to start the engine from outside the
vehicle. See below for more information.
See Keys, Doors and Windows in your Owner Manual.
See Keys, Doors and Windows in your Owner Manual.

Advertisement

Table of Contents
loading

Table of Contents