3.4.1 Capacity indication .................... 11 3.4.2 Charging the LED battery .................. 11 Operation ......................12 4.1 Different versions of the ATMOS HL 21 LED headlamp ........12 Switching on the device ..................12 Focusing the headlamp ..................12 Sterilization .....................13 Cleaning ........................13 Recommended surface disinfectants ..............13 Maintenance and service ................14 Sending in the device ....................
This manual is used to train and instruct operating personnel and is also intended as a reference manual. It may be reprinted, either in part or in whole, only with the written permission of ATMOS. These operating instructions must always be kept available near the product.
1.2 Explanation of pictograms and symbols In the operating instructions DANGER Warning of a danger resulting directly in fatal or serious injury. Observe the necessary measures. WARNING Warning of a danger of fatal or serious injuries. Observe the necessary measures. CAUTION Warning of a danger of minor injury.
Page 5
Item number Unique identifier of a medical product Medical product Serial number Specification of the degree of protection against the ingress of solids and IPX0 moisture No domestic waste Recyclable Do not look directly into the light source Connection for headlamp to LED battery Connection for recharging unit with polarity marking Test button for battery test LED of the headlamp is operated at reduced power POWER LED of the headlamp is operated at full power...
UDI application identifier UDI-DI: Identification of the manufacturer and the device (11) Date of manufacture (21) Serial number 1.3 Intended use Product name: ATMOS HL 21 LED Main function: Medical LED cold light source with headband for fixation on the head of examiner Intended use / Illumination of orifices for (e.g. ear/nose/throat) for visual purpose: diagnostics Intended users / Physicians and medical specialists user profile: Intended patient...
Battery holder Cable clip 1.6 Transport and storage Prior to dispatch, this ATMOS device was subjected to an extensive functional test and carefully packed. Nevertheless, please compare the contents of the shipment for completeness immediately upon receipt (see scope of supply).
• No warranty claims can be made in the event of damage or malfunctions caused by using non-ATMOS accessories or consumables. • Please make sure the ATMOS HL 21 LED is used in the described EMC environment. • Use only the recharging unit supplied by ATMOS.
3.2 Individual components of the headlamp ATMOS HL 21 LED headlamp Different power plugs for recharging unit (Euro/UK/US/Aus) Recharging unit, 12 V DC LED battery Connecting cable, 40 cm, 140 cm and 200 cm long ...
• Use the long connecting cable if you want to carry the LED battery in your coat pocket or trouser pocket or on your belt or if it is to be supplied by an ATMOS power source. If necessary, lay the cable under the front pad and through the cable holders in the joint of the ATMOS HL 21 LED headlamp.
• Use the primary adapter suitable for your recharging unit (Euro/US/UK/Aus). See information enclosed with the recharging unit. • To charge the LED battery, disconnect it from the ATMOS HL 21 LED headlamp. • Connect the round connector of the recharging unit to the charging socket of the LED battery.
4.1 Different versions of the ATMOS HL 21 LED headlamp 1. ATMOS HL 21 LED headlamp with long cable, supply from the LED battery in the coat pocket or from a suitable ATMOS power source in an ENT treatment unit.
• Disinfectants containing chloramides, phenol derivatives, or anionic sur- factants because they could cause stress cracks in the plastics used. If the ATMOS HL 21 LED headlamp is used by several users, it must be cleaned and disinfected regular. Do not touch the lens in the light fitting.
• Make sure the device is in safe technical and orderly condition each time before using it. Immediately replace any damaged cables! • The ATMOS HL 21 LED headlamp is low-maintenance. However, the regulations and instructions that apply to the respective field of application must be observed. • Maintenance, repairs and period tests may be carried out only by persons who have the appropriate technical knowledge and are familiar with the product.
7 Troubleshooting The ATMOS HL 21 LED has been subjected to thorough quality control at the factory. If, however, a malfunction occurs, you may be able to eliminate it yourself by observing the following notes. Error symptom Cause of error...
CE marking: Electric shock protection class (in acc. with EN 60601-1): Reference numbers (REF): 507.4500.0 ATMOS HL 21 LED 507.4505.0 ATMOS HL 21 LED (examination set) 507.4506.0 ATMOS HL 21 LED (OT set) 506.7551.0 ATMOS HL 21 LED 530.4020.0 ATMOS HL 21 LED Battery...
Page 17
Type of protection: IPX0 Reference number (REF): 507.4510.0 Recharging unit Input voltage: 100 – 240 V AC 50/60 Hz Output voltage: 12 V DC Output current: Max. 1000 mA DC Protection class against electric shock (according to EN 60601-1): CE marking: Reference number (REF): 011.1199.0 General data Ambient conditions:...
HF-shielded room of a magnetic resonance imaging system. The customer or user of the ATMOS HL 21 LED must ensure that the device is operated in a prescribed environment. Guidelines and manufacturer’s declaration – Key features ...
Need help?
Do you have a question about the HL 21 LED and is the answer not in the manual?
Questions and answers