Software Installation Requirements; Software Installation - Plustek V1.2 User Manual

B
efore installing the scanner's software, make sure that the
scanner is properly connected as described in Chapter I,
Hardware Installation, page 1.

Software Installation Requirements

Your scanner comes bundled with OCR software, image-
editing software, the scanner's driver, and TWAIN software. The
scanner's software uses approximately 40 megabytes of hard disk
space after it is installed to your computer. For Setup to properly
install the scanner's software it is recommended that you have
over 100 megabytes of available hard disk space.
megabyte free hard disk space requirement is necessary so the
installation will have plenty of room to perform its swapping
routines. Otherwise, you might receive error messages during the
installation.

Software Installation

The installation programme called Setup/Application CD-
ROM must be run from within Microsoft Windows
Windows is running on your system, please follow the steps
below to properly install the software:
1. Insert the installation CD-ROM into its disc drive.
2. If using Windows 95, click on START and RUN. If using
Windows 3.1x, from Programme Manager choose FILE and
RUN.
3. In the Open field, or Command Line if using Windows 3.1x,
enter the letter of your disc drive followed by SETUP.EXE
6
Note: The 100
™
. Once