Related Manuals for Topex TX011
Summary of Contents for Topex TX011
- Page 1 SKU:TXAP20V011 TX011 OWNER'S MANUAL 20V MAX CORDLESS AIR PUMP Thank you for buying this 20V MAX CORDLESS AIR PUMP! Please read this manual carefully before using the product.
-
Page 2: Description Of Symbols
DESCRIPTION OF SYMBOLS GENERAL POWER TOOL SAFETY WARNINGS Pounds per square WARNING Volts inch Read all safety warnings and all instructions. Failure to follow the warnings and instructions may Unit of pressure Millimeters Revolutions per No load speed minute Save all warnings and instructions for future reference The term “power tool’’... - Page 3 d. Store idle power tools out of the reach of children and 3. PERSONAL SAFETY do not allow persons unfamiliar with the power tool or a. Stay alert, watch what you are doing and use common these instructions to operate the power tool. Power tools sense when operating a power tool.
- Page 4 INFLATOR SAFETY WARNINGS output pressure to be greater than the marked maximum greater than 120 PSI(8 bars). manufacturer of the product, in addition to all safety rules for the product. Following this rule will reduce the risk of Entangled or snarled hoses can cause loss of balance or footing and may be damaged.
-
Page 5: Battery & Charger Safety Warnings
between 0°C and 40°C. the battery to cool to room temperature before use. 0°C and 40°C. 10. Use only original battery packs. The use of other charging system during charging is between 10°C and 38°C. 11. Protect your rechargeable battery against moisture, rain and high humidity. - Page 6 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge CORDLESS AIR PUMP other cordless tools. Only charge TOPEX rechargeable batteries with an TOPEX Charger. 24. The battery pack may become warm during use.
-
Page 7: Specifications
2. CONNECTING ACCESSORIES SPECIFICATIONS WARNING Max Voltage ( V ) Battery type Lithium-ion battery is removed before performing any of the Max Pressure ( bar ) following tasks. Charger input ( V ) 100-240 1. Unlock the nozzle by lifting the locking lever. SETUP &... -
Page 8: Operation
4. INFLATING OBJECTS OPERATION WARNING 3. CONTROLS damage and/or injuries. WARNING valve or ensure that the nozzle/valve is securely attached, otherwise the hose may blow out and whip about. hose and secure using the locking lever. Switching on and setting the digital pressure gauge 1.The digital pressure gauge can be used to set the on the digital pressure gauge. -
Page 9: Battery And Charging
Battery Charge Indicator BATTERY & CHARGING The purchased battery is equipped with a battery charge CAUTION: the charger for this product should be indicator to show the state of the battery charge.Press protected by a residual current device (rated at 30mA the charge indicator button and look to see which LED or less). -
Page 10: Troubleshooting
Please ask for detail by sending an email to Storage support@topto.com.au When not in use, the tool should be stored in a dry, frost free location, keep out of children’s reach. Note: TOPEX will not be responsible for any damage or person or by mishandling. - Page 12 Contact: support@topto.com.au...
Need help?
Do you have a question about the TX011 and is the answer not in the manual?
Questions and answers