Dynex DX-15L150A11 Firmware Update page 3

7. Remove the USB flash drive (stick) from the TV.
8. Power off TV, and then unplug TV from wall socket (keep TV unplugged for 5‐10 seconds).
9. Plug TV back into wall socket, wait 5 to 10 seconds then power on TV.
10. Once the TV is powered up the process is complete.
Note: It is recommended that you erase/delete the update file from the USB flash drive using
your computer prior to using the USB flash drive again.
Note: You will need to reprogram your favorite channels and any custom settings that you may
have set up.
Note: If you experience any issues while performing this upgrade, call Dynex Customer Support
at (800) 305‐2204 for assistance.
January 2011