Dynex DX-15L150A11 Firmware Update page 2

3. Turn the TV on using the remote control or power button on the side of the TV.
4. A screen similar to the one below will appear (Note: if there is no upgrade menu displayed; you
can turn your TV off, then turn the unit back on):
5. Using your remote control arrow keys, make sure the "Yes" button is highlighted and press
enter/OK on the remote. The software update will then begin
Note: DO NOT TURN THE POWER OFF OR UNPLUG DURING THE UPDATE
Note: During the software update, a progress bar will appear displaying the progress of the
update; this update takes approximately one (1) minute.
6. Once the update has completed, a screen similar to the one shown below will appear: