Dynex DX-40L150A11 Quick Setup Manual

40" LCD HDTV

QUICK SETUP GUIDE

DX-40L150A11
Remote control AC power L/R audio Component
and cord cable video cable
2 AAA batteries
TV stand and screws (4)
Quick Setup Guide
Side buttons
Installing the stand
1 Remove the stand from the box and place it on a table or bench.
2 Lay the TV on a flat, cushioned surface.
3 Align the stand with the TV, as shown.
4 Secure the stand to the column with the four screws provided.
Installing a wall-mount bracket
1 Lay your TV face down on a table or bench. Make sure that you put down a
soft cushion or cloth so that your TV is not scratched.
2 Remove the four screws that secure the TV to the base, then remove the base.
3 Remove the four screws holding the stand bracket to the TV, then remove
the stand bracket.
200 mm
M6 screws
4 Secure the wall-mount bracket
to the back of your TV using
the screws provided with the
wall-mount bracket.
Setting up your remote control
1 Press down on the battery compartment cover lock, then remove the
remote control cover.
2 Insert two AAA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries match the + and – symbols in the battery
compartment.
3 Replace the cover. Make sure that the lock snaps into place.
To program your existing remote control to work with your Dynex TV, see the
table below for common codes. If you have problems programming your
remote, or need a different remote control code, visit
www.dynexproducts.com for the latest remote control code information.
Universal remote control TV codes
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
RCA One for All Sony Comcast Dish Network Motorola TIVO
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 M1057 VIP508, VIP622 DRC800 Series 3, HD
PMDVR8, PDVR8
115
135 0464 8043 0463 720 0463 0091
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game station
Using HDMI (best)
Back of TV
HDMI device
Using component (better)
Back of TV
Component video device
Component
video cable
Note: Cables are often color-coded to connectors. Connect yellow to
yellow, red to red, and white to white.
Using S-video (fair)
Back of TV
VCR
S-Video
cable
Using composite (fair)
Back of TV
200 mm
Game console
Side of TV
Camcorder
AV cable
Back of TV
DirectTV
RC23
10463
Connecting an antenna
HDMI cable Back of TV
(not included)
Connecting a home theater system
Audio cable
Using an analog audio cable:
Back of TV
Note: Cable connectors and jacks are often color-coded. Match the colors
when you connect the AV cable.
Audio cable
Using a digital audio cable:
Back of TV
Note: The DIGITAL OUTPUT jack only works with digital TV channels.
Connecting a computer
Back of TV
VCR
AV cable Audio cable
Audio cable
Wall jack
75-Ohm coaxial cable
Cable box or satellite receiver
HDMI cable
Video or S-Video cable
Component cable
Audio amplifier
Audio cable
Digital sound system
Digital optical cable
VGA cable
Computer