Subscribe to Our Youtube Channel
Related Manuals for Sammic ACTIVE-C AX-51C
Summary of Contents for Sammic ACTIVE-C AX-51C
- Page 1 AX-51C AX-100C Dishwashers ACTIVE-C User’s manual 12 - 21 - 2900457/0 ER 0437/1/96...
- Page 2 Active AX-C TOC - Contact -EN- [EN] User’s manual Active AX-C............3 Contact If you have any queries or problems with the machine, please contact your dealer. User’s manual — 2 2 9 9 0 0 0 0 457/0...
-
Page 3: About This Manual
• Optional functions or elements not included with the main sup- nance. ply: (*) • Optional features depending on the model: [Model ...] Trademarks and copyright • Sammic is a registered trademark of Sammic, S.L. User’s manual — 2900457/0... -
Page 4: Installation
– Flat screwdriver – No. 10 box spanner Qualification for troubleshooting – Universal pliers Troubleshooting for this machine is allowed by Sammic -approved – Clamp service companies and technicians. – Pressure gauge Hazards inherent to the product •... -
Page 5: Electrical Connection
Installation Connect the water outlet hose to the drain point. Preparation for installation Connect the water supply hose to the mains water point. Check that the installation area is flat and stable. Check that the water line has a ¾" GAS shut- off valve at the end ⚠... -
Page 6: First Start-Up
Active AX-C Installation • R AID DOSE g/L: rinse aid dose in g/L. First start-up • RINSE AID FILL: rinse aid priming: ON- OFF (on-00). Turn on the water stopcock. a) Press PROG or OPTIONAL to activate ( o n) the detergent fill- Switch on the circuit-breaker of the electrical panel correspond- ing process. -
Page 7: Model Settings
Operation 2.7.4 Model settings Main operating elements If the electronic board is changed or de-configured, the machine Fig. 2: Control panel and buttons with LEDs requires the model to be adjusted by means of the following adjust- ment section: When switching on the machine, press and hold in the first few seconds while the program is loading. -
Page 8: Program Selection
Active AX-C Operation The machine heats up the rinsing boiler and the tank one after PROG button the other. • Main functions: selection of the washing pro- ⇒ gramme. The machine is ready for use when the pre- set temperatures are reached in the boiler (between 65 and 85 °C. -
Page 9: Maintenance And Troubleshooting
Operation During the washing phase, the ico n and the temperature Maintenance and troubleshooting of the wash tank are displayed. Fig. 4: Machine filters During the rinsing phase, the ico n and the boiler tempera- ture are displayed. When the wash cycle is finished, the machine informs you with the following messages: –... -
Page 10: Daily Cleaning Of The Machine
Active AX-C Maintenance and troubleshooting • Risk of skin irritation and chemical burns from contact with the Empty the tank (4.2.2). wash water: the water contains dissolved industrial detergent. [Neutral and D models] To turn off the machine, press the ⇒... -
Page 11: Troubleshooting
Troubleshooting Troubleshooting qualification: Troubleshooting for this machine is • Red output indicator LEDs: they show the element activated by allowed by Sammic- approved service companies and technicians. the microprocessor. Error messages on the screen Name of the red LED Description... -
Page 12: Technical Specifications
⭆ Do not dispose of this machine in normal house- ℹ Information hold waste. Sammic declines all liability for defects caused by faulty con- ⭆ Dispose of the machine at an authorised waste management nections when installing the dispensers. centre or through municipal waste disposal entities. Comply with the applicable regulations. - Page 13 Fig. C: AX-51C Fig. D: AX-100C User’s manual — 2900457/0...
- Page 14 Active AX-C Fig. E: AX-100C User’s manual — 2900457/0...
- Page 15 [EN ] Electronic board Fig. G: LVX User’s manual — 2900457/0...
Need help?
Do you have a question about the ACTIVE-C AX-51C and is the answer not in the manual?
Questions and answers