Paging The Parent Unit; Out Of Range Alert - Philips AVENT SCD530 - Avent DECT Baby Monitor Monitoring System User Manual

EngliSh
1
Q disappears from the display of the parent unit.
,
Tip: Switch off the nightlight when you operate the baby unit on non-rechargeable batteries. This saves
power.

paging the parent unit

If you have misplaced the parent unit and its volume is switched off, you can use the PAGE button
on the baby unit to locate the parent unit.
Note: The paging function only works when the parent unit is switched on.
1 Press the PAGE button on the baby unit (Fig. ).
The message 'Paging' and the paging symbol appear on the displays of the baby unit
,
and parent unit.
The parent unit produces a paging alert tone.
,
 To stop the paging alert tone, press the PAGE button again or press any button on the parent
unit.
lullabies function
1 Press the play/stop button E on the baby unit to play the currently selected
lullaby. (Fig. 8)
 To select another lullaby, press the lullaby button K on the baby unit within  seconds to
toggle through the list of lullabies.
Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display
starts to play.
The number of the lullaby appears on the display together with the lullaby symbol K.
,
The lullaby repeats continuously.
,
 To stop the lullaby, press the play/stop button E on the baby unit again. (Fig. 8)
The number of the lullaby and the lullaby symbol K disappear from the display.
,
 To select another lullaby when a lullaby is playing:
- Press the lullaby button K on the baby unit within 2 seconds to toggle through the list of
lullabies.
Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display
starts to play.
humidity
When there is a connection between the baby unit and the parent unit, the humidity level is shown
on the display of both units.
The optimal humidity level is between 40% and 60%. It is very important to maintain the correct
humidity level as it helps to protect your baby from irritation of the mucous membranes, dry and
itchy skin, chapped lips and a dry, sore throat. When the mucous membranes do not function
optimally, they cannot give your baby full protection from all kinds of germs. This increases the
chance of your baby catching a cold or the flu, and reduces its resistance to infections from mold
and bacteria.
Note: The baby monitor only measures the humidity level. You cannot adjust the humidity level with the
baby monitor.

out of range alert

When the parent unit is out of range of the baby unit, the parent unit beeps from time to time and
the message 'Not linked' appears on the display. The LINK light on the parent unit lights up red.
(Fig. )