Talk Function; Lullaby Function; Paging The Parent Unit; Sound Level Lights - Philips AVENT SCD535 User Manual

D
Note:
If the volume is set to a high level, the units
consume more power.

6.2 Talk function

You can use the TALK button on the parent unit
to talk to your baby (e.g. to comfort your baby).
Press and hold the TALK button and talk
1
clearly into the microphone from a distance of
15-30cm (Fig. 25).
Release the TALK button when you have
2

6.3 Sound level lights

The parent unit continuously monitors the sound
level in your baby´s room and the sound level
lights let you know if there is any activity. If your
baby cries, you see the sound level lights light up
on the parent unit.
As long as the baby unit does not detect a
sound, all sound level lights on the parent unit
are out.
When the baby unit picks up a sound, one or
more sound level lights on the parent unit go
on. The number of lights that go on is related
to the loudness of the sound picked up by the
baby unit.
6.4 Nightlight
D
Note:
You can also switch the nightlight on and off in
the menu of the parent unit (see chapter 'Menu
options', section 'Nightlight').
Press the nightlight button Qon the baby unit
1
to switch on the nightlight. (Fig. 26)
Q
Press the nightlight button Qagain to switch
2
off the nightlight.
Q
10
E
Tip:
Switch off the nightlight when you operate the
baby unit on non-rechargeable batteries. This saves
power.

6.5 Paging the parent unit

If you have misplaced the parent unit, you can use
the PAGE button on the baby unit to locate the
parent unit.
D
Note:
The paging function only works when the parent
unit is switched on.
Press the PAGE button on the baby
1
unit (Fig. 27).
To stop the paging alert tone, press the PAGE
2
button again or press any button on the
parent unit.

6.6 Lullaby function

D
Note:
You can also operate the lullaby function in the
menu of the parent unit (see chapter 'Menu
options', section 'Lullaby function').
Press the play/stop button Eon the
1
baby unit to play the currently selected
lullaby. (Fig. 28)
To select another lullaby, press the lullaby
2
button Kon the baby unit within 2 seconds to
toggle through the list of lullabies. (Fig. 29)
D
Note:
If you do not press the lullaby button Kfor
more than 2 seconds, the lullaby shown on
the display starts to play.
K