Xiaomi mi BW300 Manual

Also See for mi BW300:

User manual (121 pages)

Table of Contents

Contents

1 Product Overview
- 1.1 Package Contents
- 1.2 Parts Name
2 How to Install
3 How to Use
4 Indicator Status
5 Connecting with the Mi Home/ Xiaomi Home App
6 Specifications
7 Precautions
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

Xiaomi mi BW300 Manual

Product Overview

Package Contents

Illustration A

Camera
Mount
Charging Cable
Mounting Template Sticker
Wall Plug × 4
Screw × 4
Attention Sticker
User Manual

Parts Name

Illustration B
Parts Name

Indicator
Spotlight
Lens
Photosensitive Sensor
Thermal Sensor
Microphone
Configuration Button
Protective Cover
Type-C Power Port
Speaker
Installation Hole for Mount

How to Install

Illustration C
How to Install

Rotate counterclockwise to disassemble the mount.
1. Locking Cap
2. Base
Select a suitable mounting position (it is recommended to be 2–3 m above the ground and there are no buildings or trees around the mounting wall surface), and then place the mounting template sticker on a flat wall surface.
Drill holes (each hole has a diameter of 6 mm and a depth of 30 mm) and install wall plugs.
Fix the base to the wall with screws.
Fix the locking cap onto the base.
Hold the camera by hand and fix it to the mount.
Hold the camera by hand and adjust the angle. After adjustment, tighten the locking cap.

information Note: Please install the camera with its power port facing downwards. When the power pot is not used, please cover it with the protective cover to prevent water ingress.

How to Use

Charging: Please fully charge the camera before use. Connect the charging cable and a power adapter with an output of 5 V 2 A, and then switch on the power to charge the camera.

Turning on/off: Press and hold the configuration button for approx. 3 seconds.

Resetting the device: Press and hold the configuration button for approx. 7 seconds while the camera is turned on.

Indicator Status

Awaiting connection: Blinking orange

Connecting: Blinking blue

Connected successfully: Keeping blue

Charging: Breathing orange

Fully Charged: Indicator off

Connecting with the Mi Home/ Xiaomi Home App

This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi Home app to control your device, and to interact with other smart home devices.

Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search for "Mi Home/Xiaomi Home" in the app store to download and install it.
Open the home page of the Mi Home/Xiaomi Home app, tap "+" at the top right corner of the page, and then scan the QR code on the camera.
Select a network access method and add the camera according to on-screen instructions. Once the camera is successfully connected, the indicator will remain blue.

* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

information Notes:

Please add and connect the camera in the Mi Home/Xiaomi Home app first, and then install the camera.
This product only supports connection to 2.4 GHz Wi-Fi networks, 5 GHz Wi-Fi networks are not supported.
The version of the app might have been updated, please follow the instructions based on the current app version.

Specifications

Name: Smart Camera

Model: MJSXJ08BY

Rated Input: 5 V 2 A

Aperture: f/1.6

IP Rating: IP67

Lens Viewing Angle: 130°

Video Codec: H.264

Resolution: 2304 × 1296

Operating Temperature: -20°C to 55°C

Wireless Connectivity: Wi-Fi IEEE 802.11b/g/n/ax 2.4 GHz

Compatible with: Android 8.0 & iOS 12.0 or above

Wi-Fi Operation Frequency: 2400–2483.5 MHz

Wi-Fi Maximum Output: < 20 dBm

For more information about the consumer warranty benefits, please refer to Xiaomi's official website https://www.mi.com/global/support/warranty.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: 70mai Co., Ltd. (a Mi Ecosystem company)
Address: Room 2220, Building 2, No. 588 Zixing Road, Minhang District, Shanghai, China
For further information, please go to www.mi.com

Precautions

The operating temperature range for the camera is -20°C to 55°C. Do not use the product in environments with temperatures above or below the specified operating range.
The camera is a precision electronic product that has an IP67 dust-tight and water-resistant rating. Do not use the camera in extremely humid environments or locations that may cause water ingress to avoid malfunctions.
Do not expose the camera lens to direct sunlight, as this may damage the product's photosensitive components.
To improve the camera's performance, do not place its lens facing or next to a reflective surface, such as glass or white walls, as this will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images.
Make sure that the product is installed in an area with a strong Wi-Fi signal. Do not install the product near microwave ovens, and other objects or places that affect its Wi-Fi signal.
When the night vision feature is enabled, the change of ambient light will trigger the filter to change, probably accompanied by a slight click sound, which is normal.
Keep the product away from strong magnetic environments and do not subject the product to severe shock or vibration.
When charging, use the charging cable included in the package. When charging with a power adapter, use only a qualified power adapter (with an output of 5 V 2 A) that meets safety standards. Charging should be carried out indoors in a well-ventilated environment.
The product contains a non-detachable lithium-ion battery. It has a maximum allowable altitude of 15240 meters for air transportation. Keep it away from fire or other heat sources. Do not attempt to replace the battery yourself, as this may damage the battery or the product. The battery should only be replaced by an authorized service center and only with the same type of battery; replacing with an incorrect battery type may invalidate the battery safety protection.

information Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.