Xiaomi CW400 (MJSXJ04HL) Manual

Product Overview

Package Contents: Xiaomi Outdoor Camera CW400, power adapter, wall mount, waterproof tape for power cable, wall/ceiling mounting template sticker, screw accessory kit, user manual
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.

How to Use

Installing a microSD card

Make sure that the camera is unplugged. Open the waterproof cover above the microSD card slot and insert a microSD card with its contact points facing down.

Unplug the camera when inserting or removing the microSD card. Please use a microSD card from a qualified brand (the camera supports a microSD card with a maximum capacity of 256 GB and the FAT32 format only, and the microSD card may need to be formatted to the FAT32 format before use via Settings > Manage storage on the camera's plug-in page in the Xiaomi Home app). It is recommended that the microSD card has a read/write speed of no less than U1/Class 10.

Note: After installing or removing the microSD card, make sure to place the waterproof cover back on the card slot properly to prevent water from entering the camera and affecting normal use.

Turning on

• Insert the power adapter cable into the power port to automatically turn on the camera.
  
• The camera is successfully turned on when the indicator light is yellow and a voice prompt is heard.

Notes: Please make sure to use the original power adapter cable for connection to avoid abnormal operations. Do not twist the lens of the camera to force it to rotate after the camera is turned on. If the lens is not positioned accurately, you may calibrate it via the Mi Home/Xiaomi Home app.

Indicator status description

Yellow: Awaiting connection
Blinking yellow: Connecting to a network
Blinking blue: Connecting to a server
Keeping blue: Connected successfully

Connecting with the Xiaomi Home App

This product works with the Xiaomi Home app. Use the Xiaomi Home app to control your device, and to interact with other smart home devices.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search for "Xiaomi Home" in the app store to download and install it.
4882C916

Open the Xiaomi Home app, tap "+" on the upper right, and then follow the instructions to add your device.
Note:
The version of the app might have been updated, please follow the instructions based on the current app version.
Make sure that the camera turns on and the network connection is stable during connecting. The indicator keeps yellow when the camera is turned on, and then changes to blue after the successful connection between the camera and the app.

Resetting

Press the reset button if changing the network or the Xiaomi Account connected to the camera. A voice prompt will be heard once the reset is completed.
Note: Resetting the camera will not delete any data on the microSD card.

Precautions

• The operating temperature for the camera ranges from -30°C to 60°C. Do not use the camera in environments with temperatures above or below the specified range.
• The camera is a precision electronic product that has an IP66 dust-tight and water-resistant rating. To ensure normal use, do not use the camera in extremely humid environments or locations that may cause water ingress.
• The power adapter that comes along with the camera is not waterproof and is only for indoor use. Do not use the power adapter in extremely humid environments or locations that may cause water ingress. The operating temperature for the power adapter ranges from -30°C to 45°C. Do not use in environments with temperatures above or below the specified range.
• To improve the camera's performance, do not place it where its lens faces or is next to a reflective surface, such as glass and white walls, as this will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or may cause the camera to produce white images.
• When using Wi-Fi, please make sure that the camera is installed in an area with a strong Wi-Fi signal. Do not install the camera near microwave ovens or other objects or places that may affect its Wi-Fi signal.
• If the power cable is damaged or broken, it must be replaced by professionals from the manufacturer, after-sales service department, or departments of similar functions to avoid safety hazards.

How to Install

Mounting the camera on a wall

1. Turn the camera bo om up, align it with the locating points on the mount, and screw into the holes.
   
2. Paste the mounting template sticker where the camera needs to be installed, and drill four holes in the wall with a drilling tool according to the locating holes on the sticker. The hole is approx. 6 mm in diameter and approx. 40 mm in depth.
   
3. Insert four plastic wall plugs into the holes in the wall.
   
4. Place the mount against the wall, insert screws into the holes, and drill them into the plastic wall plugs on the wall.
   
5. Wrap the power cable port with the waterproof tape a er the camera is fixed to ensure waterproof performance.
   

• The wall must be able to support at least three times the total weight of the camera.
• The camera must be firmly fixed to the wall according to the installation instructions in the user manual to prevent accidental injury.
• Do not install near an air conditioner outdoor unit, range hood outlet, gas water heater outlet, or other heat sources.

Specifications

Name: Xiaomi Outdoor Camera CW400
Model: MJSXJ04HL
Rated Input: 12 V 1 A
Aperture: f/1.6
Video Codec: H.265
Operating Temperature: -30°C to 60°C
Resolution: 2560 × 1440
Item Dimensions: 98 × 98 × 117 mm
Lens Viewing Angle: 113°
Wireless Connectivity: Wi-Fi IEEE 802.11b/g/n 2.4 GHz
Storage: MicroSD card
Compatible with: Android TM 8.0 & iOS 12.0 or above
Operating Frequency: 2412–2472 MHz
Maximum Output Power: < 20 dBm
External Power Supply: Charge the device with the UK adapter (AD-0121200100UK-5) supplied by Shenzhen AMC Technology Co., Ltd.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Tianjin Hualai Technology Co., Ltd.
(a Mi Ecosystem company)
Address: 8/F, Huaqiao Chuangye Building, No. 10 Jinping Road, Ya'an Road, Nankai District, Tianjin, China
For further information, please go to www.mi.com