Red Arrow MET10-60 Installation Instructions

Meteor Floodlights
Product Codes: MET10-60, MET20-60, MET30-60, MET50-60,
MET100-60, MET150-60, MET200-60
Safety Warning
•
The installation should be carried out
by a qualified electrician in compliance
with the current edition of the IEE
Wiring Regulations.
•
Prior to installation, carry out the
necessary risk assessment considering
the people who could be at risk,
the level of risk and the precautions
required to control the risk
•
Ensure that the circuit supply is
isolated either by the circuit supply
fuse being removed or the applicable
Specification
Box Contents -
1 x Meteor Floodlight
MET10-60: L: 95 x W: 120 x D: 15mm
MET20-60: L: 105 x W: 140 x D: 19mm
MET30-60: L: 145 x W: 177 x D: 19mm
Dimensions: MET50-60: L: 193 x W: 223 x D: 19mm
MET100-60: L: 242 x W: 291 x D: 19mm
MET150-60: L: 305 x W: 353 x D: 24mm
MET200-60: L: 336 x W: 403 x D: 25mm
Material: Body - Die-cast Aluminium, Lens - Polycarbonate
Working
Standard: -20°C - 45°C
Temperature:
1m Pre-wired Cable
Included:
Steel Mounting Bracket
10-
180-
LED
100
240V
WATT
Maximum Fittings Per Circuit
Automatic Circuit Breaker Type: B6
Rated Current: 6A
Cable (mm): 1.5
MET10-60
150
MET20-60
75
MET30-60
60
MET50-60 30
MET100-60 15
MET150-60 10
MET200-60 7
Installation Instructions
1. Ensure there is adequate free air circulation of at least 100mm around the fitting. All fittings run hot. It is the installer's responsibility to consider any fire
risk and take appropriate precautions.
2.
The nearest illuminated surface must be at least 0.5m from the front of the fitting.
3. Check for concealed cables before drilling any fixing holes.
4. Fix the bracket to a wall or similar hard surface.
5.
Connect the cable to the power supply.
PAGE 1 ( FRONT PAGE )
INSTALLATION INSTRUCTIONS
circuit breaker being turned off before
installation or any maintenance.
•
Check the total load on the circuit
ensuring the luminaire does not exceed
the rating of the circuit cable, fuse or
circuit breaker.
•
Long-term use and voltage fluctuations
can reduce the life span of the fitting.
•
If the fitting incorporates control gear,
ensure careful sizing to avoid instances
of nuisance tripping of the protective
device used in the installation.
IP65
6000K
B10 B13 B16 B20 C10 C13
10A 13A 16A 20A 10A 13A
1.5 1.5 1.5 2.5 1.5 1.5
250 325 400 500 250 325
125 163 200 250 125 163
100 130 160 200 100 130
50 65 80 100 50 65
25 32 40 50 25 32
17 22 26 33 17 22
11 14 18 22 11 14
•
•
Wmm
900-
IK07
19,600LM
C16 C20
16A 20A
1.5 2.5
400 500
200 250
160 200
80 100
40 50
26 33
18 22
Follow the provided installation
instructions, using the fixings supplied
or recommended.
Keep out of reach of children.
Dmm
2
YRS
GUARANTEE