Related Manuals for Haier 600 Series
Summary of Contents for Haier 600 Series
- Page 2 contains Make sure the ventilation paths inside the appliance are not blocked.
- Page 3 Cycle...
- Page 4 product’s...
- Page 7 certified...
- Page 10 Dial Press the Power button (Fig. 3-2) to turn ON and OFF the product. Dial Dial cycle cycle...
- Page 11 dial corner...
- Page 12 This is the Favorite button. Choose a cycle and preferred settings, start the cycle, then press this Favorite button (Fig.3-13) for 3 seconds to save it as your favorite cycle (Fig.3-14). Users can save up to 3 favorite cycles. In future, users can press the Favorite button to directly select cycle from your favorite cycles with preferred settings.
- Page 13 ) to change the air temperature Press the Temp button (Fig. for the drying stage of the cycle. High Medium low Cool...
- Page 14 Product will beep for 2min when in ideal condition for ironing. Pause cycle and remove garments.
- Page 15 Cycle Autosensing cycle which is used to dry durable heat-resistant infant wear made of cotton.
- Page 16 Cycle drying...
- Page 17 When the load is less than 1.0kg, the "Timer" cycle should be selected, because sometimes it may not be able to sense the dryness level of the clothes when the load is too small. cycle cycle...
- Page 18 cycle gentle process gentle process gentle process gentle process gentle process moderate temperature...
- Page 19 laundry bag.
- Page 20 be selected. Load Put laundry into the appliance cycle cycle...
- Page 21 Set functions such as Temperature, Dry level, Delay, and then press the Start/Pause button (Fig.6-8) to start the cycle. screen displays Use Refresh Pro function Install the ultrasonic atomization module. This module is located in the upper right corner of the drum (Fig.6-14).
- Page 22 Use drying rack drying drying drying...
- Page 26 load size. screen st- ops or skips. size...
-
Page 27: Cavity Dimensions
Product dimensions PRODUCT DIMENSIONS Overall height* - Min : 845mm - Max : 850mm Overall width : 595mm Overall depth : 697mm** Depth of open door : 1188mm xact height is dependent on foot adjustrment PLAN Cavity dimensions *Front panel of the product CAVITY DIMENSIONS Minimum cavity height : 860mm Minimum cavity width : 622mm... - Page 28 fully...
- Page 29 ches reversing work is completed.
- Page 30 The following washing machine models can be stacked with this machine using a Stacking Kit. For more information, please refer to the Installation Guide in the stacking kit package. - HDHP10PXW1: HWF12PXW1 with stacking kit ASKDPXW1 - HDHP10PXB1: HWF12PXB1 with stacking kit ASKDPXB1 dryer does not rock in any direction.v...
- Page 31 this will avoid the risk of having to empty the water tank during a cycle. 9-10...
Need help?
Do you have a question about the 600 Series and is the answer not in the manual?
Questions and answers